Results 1 to 4 of 4
Thread: Chassis wiring
02-27-2013, 05:02 PM #1
- Join Date
- Feb 2013
I'm looking to redo the interior of my 2005 chevy equinox FWD, 3.4L V6 which would require me to change out the wiring that I believe is called the chassis wiring harness but I'm not sure and thats what I need to know.
I need the name of the type of harness that connects to the radio, temperature controls, power windows switches, speedometer, and steering wheel controls(cruise control and radio/volume controls).
Also, does anybody know where I can find a good diagram or instructions on how to install the harness and the level of difficulty 1 - 10... 6 being extremely hard.
02-27-2013, 05:03 PM #2
- Join Date
- Apr 2010
- Piermont,NY, back in Northern NJ now, But may be in IL soon....
Why are you doing this?08 Z71 Avalanche Mods to date: K&N CAI,Hellwig Swaybars and End Links, Corsa Sport Exhaust, Superchips Programer,IPCW LOF & 3rd brake light and tails, AMI Gas door,Show Hooks and Door locks, Enkei Wheels, with Pirelli tires, StreetScene Bowties, Grant Steering wheel,Muth signal mirrors,SSBC Big Brake kit,Huskyliner Mug gards,Floor mats and Hood shield, McGard Lug nuts and locks, Bedrug, Cervini's Ram Air hood,35watt HID Fog lights, Sylvania bulbs all around ZXE's Highs and Lows, WhiteNight Back up lights,Sirius and HD Radio, SnugTop sitting on deck now Got a Softopper on now,Tempress Boat Hatches.... New Bilstein shocks are on... New Mods coming soon..... X
02-27-2013, 06:43 PM #3
- Join Date
- Jan 2009
- Norwalk, Ohio
- Blog Entries
Welcome to the site!!
on a scale of 1-10, ummmmmmm 15...
i installed a chassis harness in a 97 firebird, and it was a pain in the arse. I stripped the interior completely down to bare metal, and then ran the new harness. Mine was needed to be replaced due to a fire, you could install it with the interior in but you would have to cut sections and then resolder back together which I don't recommend.2004 Chevy Colorado
LS1 5.7 swap/TBSS rear axle swap
02-27-2013, 07:41 PM #4
I'm with enkei on this one... why are you doing this? If it's to get upgraded features, you'd most likely be better off to buy a car with those features than to change out the harness and everything to get them in factory form. If yours is damaged from a fire or something, I'd say installing a whole new dash/interior harness would be ranked up in the 10 area because it does involve stripping pretty much everything down.
2001 Silverado Reg. Cab Not-So-Base -- SOLD
2003 Avalanche Z71. No Cladding. Check out my Mod thread.
1974 Triumph Spitfire 1500 - Work in Progress
2003 Sierra 3500 Duramax. The Newer, Better Work Truck
By parts bot in forum Chevy Parts eBayReplies: 0Last Post: 12-09-2012, 08:40 AM
By alb9110 in forum General ClassifiedsReplies: 0Last Post: 07-07-2011, 12:17 AM
By Big_Ben in forum Maintenance & UpkeepReplies: 8Last Post: 01-12-2011, 04:31 PM
By clairemont in forum General Chevy & GM Tech QuestionsReplies: 0Last Post: 12-30-2008, 10:10 PM
By Davandy in forum GM Electrical TechReplies: 7Last Post: 08-18-2007, 01:39 AM