Results 11 to 17 of 17
Thread: Rigid Industries LED light bar
03-07-2013, 06:07 AM #11
The company I ordered mine from is NorCal trucks. I called them a few weeks ago to check on the status of my mounts. They don't actually manufacture the mounts themselves so they are at the mercy of others. They told me the mounts had been made and sent to the powder coater to be painted. I should have them in hand in about another week or so. I will post pics when I do the install with lots of pics. @Burden33 has mounted a 50 inch bar on his truck and I am looking forward to the advice he has on switch location. If you have any questions that I may be able to help with just let me know.
Just got an email from NorCal trucks. Brackets are in the mail!!!!
Last edited by aloxdaddy99; 03-07-2013 at 07:25 PM.
2011 GMC Sierra SLE - 5.3 - 4X4 - Z71 - King Shock Level Kit - Body Color GMC grill emblem - 2 Tone Engine Cover, Rad Cover and Battery Box - Volant CAI - Tru Cool 40K tranny cooler - Sylvania ZXE bulbs Hi/Low -TriFold Hard Tonneau Cover- CoverCraft Seat Covers - Diablo inTune - GoRecon LED under rail lights - GoRecon LED White Lightning Tailgate Light Bar - Windows tinted to 45%- Kenwood DNX6990 - JL Audio C5-650 &650X- JL Audio Amp- Interco Truxus M/T 33x12.50x18
03-08-2013, 03:04 AM #12
aloxdaddy99- I couldn't wait to order the brackets, so I just drilled a new set of bolt holes for mine. Although, having the smaller brackets would have made my install a lot easier. I posted a couple of pictures if you're interested. Just FYI, there is barely room in the air-dam area as it is, and installing the 20" light bar is a BITCH w/o pulling the bumper.
I hope your install goes a lot smoother than mine did. Good luck!
03-08-2013, 03:11 AM #13
03-08-2013, 09:39 AM #14
SurrealOne Have you noticed any increase in operating temperature since install? It appears that more than half of the slots are somewhat blocked from the lights. Just curious as I may be interested in mounting a bar behind my grille that I installed(with no noticeable increase in temp. noted) in that slot.
2011 Silverado CrewCab 5.3L*Ram Air Look Cowl Induction Reflexxion Hood*6" Pro Comp Lift*Flowmaster Dual exhaust*Perfect Launch Rear Diff. Cover*Led Smoke Taillights*L.E.D.Smoke 3rd Brakelight*60" L.E.D. Tailgate Bar*Rearview Mirror Reverse Camera and Sensors*Smoke Headlight Covers*Front Bumper Grill Insert*Deezee Black Alum. Diamond Rail covers*20" Ultra Motorsports Rims wrapped with 35.5"B.F. Goodrich Tires*Inchannel Raingaurds*CAI*Bullydog GT Tuner*Alpine Amp*Boss 6x9's*Boston Acoustic Subs*Terrantula Tweeters*Custom Sub box*Red Led Interior Accents*5% Ultimacool duo tint rear window and doors, 20% front doors*Custom Vinyl Graphics*Demolded*Debadged*Painted drums and calipers*
Future Mods Include: Custom Interior Hydrographics, Electronic Rollup Toneau Cover, 4.56 Gears, Painted rear bumper
03-08-2013, 11:39 AM #15
The person to ask would be @SeanBurgandy, as he's got a NNBS truck, like you, and I don't think he's done the kind of cooling mods I've done. @aloxdaddy99 would be a close second, as his radiator is OEM but he's upgraded his tranny cooler to the Tru Cool 40K GVWR, as well. Either should be able to provide a closer benchmark than I can once they've run with their bars installed for a while. (Also note that you'd likely be installing the same 20" bar they are using, so again ... a closer guestimate than I can provide since my bars and airflow through the bumper slot are different from yours/theirs.)
06-24-2013, 10:21 AM #16
- - - Updated - - -
Fabtech/Banks Ram Air |Fuel Off Road/ 315/70/17 duratracs |Hyper tech / Spencershids |Color Matched Bowtie |15% Tint on Front Windows|20% Tint on Back Windows
Chevy Ridin' High
"Black rims are as cool as a boner at a swim meet"
06-24-2013, 03:58 PM #17
cool! I love the locations you chose. very discrete. almost cop-like. you gotta post some good nighttime photos so we can see cast & throwGas was $1.83 when Obama took office.....
By Jper in forum Contests & GiveawaysReplies: 4Last Post: 06-25-2012, 06:19 PM
By MTM in forum Lighting DiscussionReplies: 4Last Post: 04-23-2012, 01:21 PM
By Silverstreak in forum Lighting DiscussionReplies: 4Last Post: 03-14-2012, 06:31 PM
By dkj313 in forum Chevy Truck AccessoriesReplies: 0Last Post: 12-11-2011, 07:22 PM
Tags for this Thread