Results 1 to 10 of 23
11-12-2012, 10:34 PM #1
Denali HD grille conversion on an NNBS 1500
I am looking at getting a new grille to replace the crappy black plastic and the cheap insert I have on it. I love the look of the Denali HD grilles on the 2011+ 2500HD's. I have seen online that a few guys have pulled off this conversion and are running an HD grille on their 1500.. except this has only been on the Silverado's I have yet to see someone to a swap with the Denali HD grille.
What is required to do this, anyone know?? I'm betting it isn't a direct fit. Would I need the HD hood, or maybe relocating the front bumper?
Any help would be appreciated. Trying to set my truck apart from the rest.09 Sierra SLT
- Denali grille, black HALO headlights, smoked tails & brake light, 20% tint, Carbon fiber interior
- Top Gun Customz 2.5" leveling kit, 305/55/20 Toyo Open Country AT's on GMC 20's
- K&N 77 series cold air intake, Flowmaster super 10 series exhaust
Next up: Smoked fog lights
2000 Silverado Z71
- 4" body lift, 315/65/16 Mastercraft Courser AT2 tires
- Stainless steel Excalibur catback exhaust
- Lots more to come!
11-13-2012, 02:33 AM #2
The difference between the HD and the 1500 there is that the HD has a 2" body lift from the factory. The bumper mounts the same though, and they just use a taller plastic cap on the top of the HD bumper to accomodate the gap. I'm not 100% sure on the GMC, but I believe the grille goes almost all the way down the middle of that cap, which would make it too tall to fit a 1500 without a 2" body lift and the HD bumper cap to go with it. If it happens to be the same height as the 1500 grille though, it would be a really simple swap.
2001 Silverado Reg. Cab Not-So-Base -- SOLD
2003 Avalanche Z71. No Cladding. Check out my Mod thread.
1974 Triumph Spitfire 1500 - Work in Progress
2003 Sierra 3500 Duramax. The Newer, Better Work Truck
11-13-2012, 12:06 PM #3
best bet might be to go to a dealer and ask to look at one and see what differences you can see.
2011 GMC Sierra SLE 5.3 Z71 4X4 Stealth Gray Metallic
Tow mirrors - Diablew Tuned - Flowmaster Regular 40 - Ready Lift 2.5' lift - BFG LT A/T K/Os - Carr Light Wing - TruckLite LED lights - Optima Red Top - 50% Front Window Tint - Line-X bedliner - Aidaid MIT - Tekonsha P2 - ARS Billet Grill
11-14-2012, 09:20 PM #4
Alex : that's a good idea. Might go do that this weekend if I'm looking for some time to kill.
pmf608: My truck has a 2.5" leveling kit, which would put the front ride height around the same as a stock 2500HD. So maybe this would help.. and upon doing some research I think you're right about the bumper cap. I believe the 2500HD and 1500 have different caps. So I'm unsure about that. Just to clarify, you ARE talking about the part I have circled in the pic blow, right?
Also, does anyone know if the grille will align with the 1500 hood..? Or would I have to go with the 2500HD hood too? Thanks for the help.
11-14-2012, 11:33 PM #5
Yep, that's the part I was talking about. Your overall height should be close, but the HDs are lifted 2" above the frame to clear the top of the Allison transmission, so they made the cap taller to cover that gap. I'm not 100% sure what the differences in bumper brackets, etc. are to make everything fit but as far as I know, that cap would be the main point of concern on yours. The hood should line up.
11-15-2012, 08:01 AM #6
- Join Date
- Mar 2012
- Blog Entries
Is the 2" leveling kit the same thing as a 2" body lift? I already put shocks with the 2" added on and a 2" suspension lift on the back. So would need a 2" body lift to be able to install bumper cap? How about the rear bumper cap? Different also?
11-17-2012, 02:37 PM #7
Well guys, this just seems like too much of a pain for me to do. I don't want to risk buying all the parts and something still not being right. I found a 1500 Denali replacement grille on ebay for $245 so I'm just going to go with that. It's cheaper, I know it will fit, and I will be able to replace it myself.
Thanks for the help everyone. I will post a pics of the new grille (and possibly headlights) in my trucks thread after it is all finished.
11-17-2012, 04:32 PM #8
11-19-2012, 09:43 PM #9
11-19-2012, 09:46 PM #10
what are you planning on doing with the old grill btw?
might be interested in that.
By WaldoAZ in forum Chevy Silverado Forum (GMC Sierra)Replies: 12Last Post: 11-20-2012, 10:27 AM
By parts bot in forum Chevy Parts eBayReplies: 0Last Post: 10-11-2012, 11:20 PM
For Sale NNBS Chevy Silverado Chrome GrilleBy AMac in forum General ClassifiedsReplies: 1Last Post: 08-11-2012, 12:07 PM
Wanted to Buy 2007+ NNBS OEM Chevy Emblem for GrilleBy AMac in forum General ClassifiedsReplies: 0Last Post: 05-04-2012, 09:30 PM
By AllBlkdOut07 in forum General ClassifiedsReplies: 6Last Post: 04-30-2010, 04:47 AM