GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 5 of 5
  1. #1

    Default rear diff ? 1998 k1500

    My 98 k 1500 has the 10 bolt rear axle will a posi unit out of a 95 impala ss 10 bolt rear axle work in my truck rear axle? .They both have a 8.5 ring gear. My buddy has a used posi unit that I can get cheap any info will help. Thanks crazyforgms

  2. #2

    Default

    It should handle the torque, but you need to check the track width, the car axle might be narrower than the truck axle.

    Also, check the spring perches, the car probably has coil springs and the truck probably has leaf.

    Then, you have the brakes to consider; the car is probably disk, the truck is probably drum, and don't for get about the parking brake, it would be nice to reuse all of the truck parts.

    And, don't forget the hubs, the car probably has 5 stud wheels and the truck may have 6
    Ray

    '09 Avalanche LTZ - Black
    '05 Envoy XL (sold)

  3. #3

    Default rear dift

    sorry what I maent is used the posi unit out of the axle & put in in my truck axle

    crazyforgms

  4. #4

    Default

    I'm not familiar with all of the applications, but I do see that the GM 10 bolt came with both 28 and 30 spline options. If I had to guess, I would guess that the car application uses a 28 spline axle where the truck application uses a 30 spline axle. I have no idea if the 28 and 30 spline carriers are the same or not. Maybe they are the same and the only difference is in the spider gears/other guts of the carrier, or maybe the carriers are different. If nobody here can answer the question definitively, you might ask the parts guy at a dealership if the gov-lock carrier for the 28 and 30 spline are the same part number or if they are different part numbers. If they are the same, then the carriers are probably interchangeable (if you swap out/replace the spider gears with 30 spline versions). If the carriers are different, then they may not be interchangeable.
    '98 K1500 Suburban LS 5.7 L 4L60E NV246 ARB
    '92 Ford Explorer XLT 4x4 4.0 L A4LD BW13-54 Trac-loc rear
    "My toys were the greasy cogs and springs and pistons that lay around all over the place, and these, I can promise you, were far more fun to play with than most of the plastic rubbish children are given nowadays." Danny in Roald Dahl's Danny The Champion of the World

  5. #5

Similar Threads

  1. Rear Springs Binding or Rear Diff Going?
    By Cobrasix in forum Chevy Silverado Forum (GMC Sierra)
    Replies: 6
    Last: 01-03-2013, 02:09 AM
  2. Switching to a 14 Bolt Rear end in my 1998 k1500
    By chevyman882001 in forum GM Powertrain
    Replies: 0
    Last: 02-26-2011, 03:53 PM
  3. Proud new owner of a 1998 k1500
    By Bachwacker in forum Member Introductions
    Replies: 8
    Last: 11-02-2010, 09:40 PM
  4. What rims will fit 1998 k1500 suburban???
    By miller57 in forum Chevy Suburban Forum (GMC Yukon XL)
    Replies: 2
    Last: 12-19-2009, 10:56 AM
  5. 1998 Chevy 4 X 4 K1500
    By hankms in forum Chevy C/K Truck Forum
    Replies: 1
    Last: 12-16-2007, 10:03 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •