GM Truck Club
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 4 of 4
  1. #1

    Default found a good source for stainless-steel Speed Bleeders

    Hi everyone,

    Many years ago, I installed Speed Bleeders on one of my vehicles. I loved them - they made one-man brake bleeding a snap. However, much to my dismay, they began to rust up after a few years. This is not a big deal for standard bleed screws, but it matters on the Speed Bleeder where the ball valve must remain operational. Eventually I replaced them with standard bleed screws again, since those were at least cheap to replace.

    I picked up a 2006 Yukon XL Denali with 90k miles a couple months ago, so I'm new to this crowd. While searching for stainless steel brake hoses, I saw in the search results that Speed Bleeder now has stainless steel versions of their bleed screws! Like many Chevy/GMC vehicles, my truck takes SB1015-SS in front and SB1010-SS in rear. However, the stainless steel bleeders are harder to find. You can order them direct from Speed Bleeder, but they want $15 each plus $5.95 shipping, for a total of $65.95 shipped. That's a bit steep.

    I found an Ebay seller who sold some of the stainless versions at a pretty good discount. He didn't carry the SB1010-SS, but I asked him to order and carry them for the Chevy/GMC crowd, and he agreed! He sells the stainless Speed Bleeders for $12 each plus $5 flat shipping, for a total of $53 shipped front and back. That's a good price for one-man bleed screws that will last the life of the vehicle.

    His name is Kirby and his Ebay user name is kz10cubed. He caters mostly to the motorcycle crowd, but I'm glad he was willing to help us out. You can see his auctions with this link:

    then search for SB1015-SS and SB1010-SS.

    I have no connection with him; I just wanted to share my findings with my fellow Chevy/GMC owners.

    - Chris

  2. #2


    Good to know. I have used the speed bleeders a few times and they helped out being that I was doing the job alone. I bought them at autozone, I never had an issue with them rusting though, even though I live in Michigan where they use a lot of salt.

    1995 Silverado 4x4
    6" BDS Suspension Lift-3" Body Lift-Add A Leaf in rear -Trailmaster SSV Shocks-Duel Steering Stabilizer Kit -AirAid Cold air intake-
    4.56 Gears with Detroit Auburn Locker-Pro-Comp Traction Bars with duel shocks-Aluminum Skid Plate Kit-38.5" x 16.5" Mickey Thompson Baja Claws-Constant Dropping fuel gauge

    2005 Yukon XL Jet Power Programmer, Bilstein Shocks, Bilstein rear springs, Helwig Anti-sway bars, EGR Window Visors, EGR Hood Shield, Denali Headlights, Headlight harness upgrade, GE NightHawk Bulbs, White Night Rear lighting system, Russell Braided SS brake lines, PowerStop Brake pads, PowerStop cross drilled and Slotted Rotors,
    2002 Silverado ext cab 2wd (Sold)
    2003 Yukon XL (Totaled)

  3. #3


    Thanks Pikey, that's also a good data point. They are also quite fond of salt here in northeast PA. "Rusted up" is probably not a good way to describe it; it was more like surface pitting that eventually interfered with the operation of the ball valve. I was gun-shy on Speed Bleeders after that experience, but maybe mine came from a bad batch with poor electroplating? In any case, I plan to go with SS for my Yukon just to rule out the possibility of it happening again.

  4. #4


    The first time I saw them I was thinking, "Really?, just another gimmick" But, they actually worked. I had a set on for 5 years and they still looked shiny and new. I also cap them to prevent water from getting in them. The only thing I do not like about them is that you can go thru a lot of brake fluid FAST

    - - - Updated - - -

    Moved to General Chevy/GM Tech Forum

Similar Threads

  1. Found a Solution for those needing a switched power source
    By 09Z71 in forum Chevy Silverado Forum (GMC Sierra)
    Replies: 5
    Last: 01-10-2011, 09:12 AM
  2. Need three wheels and lug nuts. Good source?
    By jerryrig in forum Member Introductions
    Replies: 10
    Last: 12-03-2010, 07:16 PM
  3. Good Socal Parts source?
    By BASTOS in forum CA - SoCal Chevy Truck Club
    Replies: 0
    Last: 04-05-2009, 06:08 PM
  4. Good Socal Parts source?
    By BASTOS in forum Member Introductions
    Replies: 0
    Last: 04-05-2009, 06:08 PM
  5. Anybody know of a good source for replacement headrests?
    By MN_Burbon in forum Chevy Suburban Forum (GMC Yukon XL)
    Replies: 17
    Last: 06-23-2007, 07:43 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts