Results 1 to 5 of 5
03-14-2013, 12:55 PM #1
- Join Date
- Jan 2013
1999 Silverado 1500 ignition lock cylinder removal and replacement
My 1999 Silverado has 212,000 miles and apparently the tumblers in the ignition lock cyliner are worn out. Can't find any tips on changing this, anyone have any experience with this?
03-14-2013, 06:15 PM #2
03-14-2013, 06:36 PM #3
Is there a hole (approx 1/8") oround the cylinder or column? If so put your key in,turn to run,put something in the hole & depress button while pulling out on cylinder,small allen wrench or punch may work.
06-16-2014, 04:55 PM #4
- Join Date
- Jun 2014
06-17-2014, 07:30 AM #5
I would get a key made from this master key . then use the copy key not the master.
sometimes this will not work because if you continue to work the worn key to get it to start the cylinder gets damaged. so when the key sticks get new quickly .. good luck ..
By at2thomas in forum Chevy Silverado Forum (GMC Sierra)Replies: 6Last: 12-02-2012, 09:40 AM
By parts bot in forum Chevy Parts eBayReplies: 0Last: 12-04-2011, 05:50 PM
By ChevyFan in forum Chevy Parts eBayReplies: 0Last: 11-02-2011, 01:00 AM
By MDrumm03 in forum General Chevy & GM Tech QuestionsReplies: 0Last: 05-05-2011, 11:40 AM
By slim in forum General Chevy & GM Tech QuestionsReplies: 2Last: 08-10-2009, 07:02 PM
Tags for this Thread