GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 2 of 2
  1. #1

    Default Help needed adjusting brakes

    Hi, my name is Kevin. I drive hook truck for an Akron Ohio container company called Estes Hauling. I drive a 2000 C7500 with. cat engine. I brought my truck home to clean it up and replace the tail lights. I notice my truck air brake does not hold like it used to. I figure the slack adjusters need adjusted but I am not sure how to do it so I joined this forum. I would appreciate any help you can offer. I would like to adjust them tomorrow since I have all the other work completed. I am mechanical but have worked mostly on fords. Here is what the truck I built looked like when finished and what I started with. So if you give me the basics I will be able to adjust the brakes. I looked at the slack adjusters and saw what I thought to be the stud to turn to adjust the brakes but thought I would make sure before I screwed up something.

    Click image for larger version. 

Name:	image.jpg 
Views:	56 
Size:	36.3 KB 
ID:	50502Click image for larger version. 

Name:	image.jpg 
Views:	57 
Size:	77.8 KB 
ID:	50503
    Last edited by Ksmith203; 03-16-2013 at 07:18 PM.

  2. #2

    Default

    Hi my name is mark im a truck driver how we adjust them 3/8 or 11 mm socket or wrench turn till brakes r tight to drum then back off 1/4 turn to do the front take a wooden tape front brakes should measure 1/4 from the back of the push rode if you have any problem be in akron on wed. the bolt you c on the slack adjuster is the one your looking for
    93 GMC SUBURBAND 24" RIMS / 98 ISUZU RODEO 20" RIMS

Similar Threads

  1. Tie Rod Adjusting Sleeves
    By My99Silverado in forum Lifted & Offroad Suspension
    Replies: 0
    Last Post: 03-28-2011, 06:53 PM
  2. Adjusting tailgate
    By safetyfast in forum General Chevy & GM Tech Questions
    Replies: 3
    Last Post: 06-06-2009, 05:43 PM
  3. Adjusting timing
    By Crawdaddy in forum GM Powertrain
    Replies: 6
    Last Post: 11-17-2008, 01:07 PM
  4. adjusting the door
    By bensdive in forum General Chevy & GM Tech Questions
    Replies: 2
    Last Post: 05-15-2008, 07:28 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •