Results 1 to 10 of 13
Thread: Hitch from U-Haul?
03-19-2013, 07:50 PM #1
Hitch from U-Haul?
Looking to get a trailer hitch installed on my 2007 GMC Sierra 1500 LD and some of the local guys have said the hitch needs to be bolted to the truck frame and rear bumper but I've seen my buddies truck with the hitch just bolted to the frame.
Does anyone have a U-Haul sold trailer hitch installed on their truck and is it bolted to the rear bunper, I think the same hitch is good up to 2011 but not 100% sure.* My post are intended for entertainment purposes only and should not be taken serious unless I'm posting in the Buy/Sell section of this board and all opinions are that of mine ONLY.
03-19-2013, 08:32 PM #2
I don't know what year and model vehicle your friend has??....
Starting in 1999" to present day, the Chevy/G.M Trucks, if they have the "Factory Tow Package".....the Trailer Hitches are bolted to the Fame and Bumper at the Factory........on the aftermarket Trailer Hitches, some just bolt-up to the Fame, and not Rear Bumper, and some Bolt-up to both Fame-n-Bumper.
Number #3 in this Diagram, is where the bolt's mount to the bumper, on the Factory Hitches.
Edit......Though I would post-up the other items that come with RPO Code "Z82"....the Factory Tow Package,
.....Trailering Equipment HD Includes Trailer Hitch Platform. 7 Wire Harness, K47 high Capacity Air Cleaner, (KNP) Cooling External Transmission Cooler,
Last edited by 99'HEARTBEAT; 03-20-2013 at 03:49 PM. Reason: Added Infor.
03-20-2013, 01:09 AM #3
^^^ So in your opinion is it important for me to bolt the hitch to the bumper or will it be ok to bolt it to the frame only, reason why I ask is cuz my rear bumper is bent down a little so the bumper holes will not line up with the hitch.
03-20-2013, 01:56 AM #4
Creative use of a jack and a 2x4 of reasonable length may be able to remedy that bumper hole alignment issue?
Last edited by SurrealOne; 03-20-2013 at 02:19 PM.
03-20-2013, 11:13 AM #5
Its not my opinion, I was just expressing to you, that there are 2-different styles of Trailer Hitches "Mounting Points" I would mentioned that when buying a Trailer Hitch for your truck, keep in mind that there are different Classes of Trailer Hitches.....below are the different Classes of Trailer Hitches, the link that I've posted above are the different Classes of Trailer Hitches Hitches that are for truck.
****Each Class of Trailer Hitch listed below has a.....Tow Capacity: Max" Weight" Tongue Rating and Max Towing "Weight" Rating.
- Class I
- Class II
- Class III
- Class V
- Class IV
****Also.......next to installing a Trailer Hitch......the Most Important Item to have when Towing is a.....Transmission Cooler, as I mentioned above regarding the Items that come with the Factory Tow Package.....IMO the One Item that is the Most Important Item on that List,.....is the Transmission Cooler, this is A "Must Have Item When Towing"
The reason I've mentioned the different Classes of Trailer Hitches and the Transmission Cooler.....is I'm guessing your Truck does not have the Factory Tow Package??.....
Last edited by 99'HEARTBEAT; 03-20-2013 at 11:27 AM.
03-20-2013, 11:39 AM #6
- Join Date
- Dec 2004
- Arlington, Texas, United States
- Blog Entries
What is the truck going to be towing? Are we talking a small utility trailer from time to time, or frequent and heavy towing over long distances?
10 Chevy Traverse LT AWD
02 Chevy Trailblazer LS (110K+ miles - loaded except for 4WD - WRECKED!)
99 Chevy Cavalier LS (105K+ miles - commuter car)
78 Chevy Suburban Silverado (454, 3/4 ton)
62 GMC 3/4 ton Pickup (350 police interceptor)
Remember: Search Before Posting | Fill out Your Profile & Signature
Follow Us Please: facebook.com/gmtruckclub | twitter.com/gmtruckclub
Support GMTC: Help the site, contribute today
03-20-2013, 11:54 AM #7
- Join Date
- Mar 2007
- Grand Prairie, Texas
- Blog Entries
Like mike pointed out hitchs come in different mounting point configurations. My 2011 has a factory hitch and towing prep package (z82) but its only bolted to the frame. My neighbors 2011 with Z82 package has the hitch mounted to the bumper.
Ás a long time truck owner I personnally prefer the hitch mounted as far forward towards the rear axle as I can get it this helps the truck hsndle loads better when more of the weight is closer to the axle. Ive even dad hitchs on a few trucks reworked to get better towing results. If you have a choice look for a hitch that bolts only to the frame. If you dont have a choice then you will need to use the bumper mount points and surreal gave you s good tip on how to make it work. Start by mounting everything loosely and tightening it into place.
03-20-2013, 11:34 PM #8
Thanks guys, very much appreciated.
- - - Updated - - -
The only thing I'm concerned about is if the hitch has the holes to mount to the rear bumper and I don't use them will the hitch still be safe to use bolted to the truck frame only.
03-21-2013, 07:00 PM #9
03-22-2013, 12:15 AM #10
By parts bot in forum Chevy Parts eBayReplies: 0Last Post: 12-27-2012, 09:10 PM
By parts bot in forum Chevy Parts eBayReplies: 0Last Post: 11-28-2012, 01:20 AM
By parts bot in forum Chevy Parts eBayReplies: 0Last Post: 11-01-2012, 12:30 PM
By 1flyfisher in forum General Chevy & GM Tech QuestionsReplies: 1Last Post: 04-17-2010, 09:04 AM
By judsteele in forum General Chevy & GM Tech QuestionsReplies: 0Last Post: 11-16-2009, 09:13 AM