GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Page 2 of 4 FirstFirst 1234 LastLast
Results 11 to 20 of 34
  1. #11
    Jr. Apprentice
    Join Date
    Mar 2013
    Location
    Lynchburg Va
    Posts
    18

    Default

    Yea the shop told me to bring it back after 500 miles to make sure the bolts on the lift haven't come loose and they checked it and said they could not find out the nois

  2. #12

    Default

    if the noise is that evident and the shop can't figure it out then I would be questioning the ability of said shop. Was it a detail and accessory shop?

    1995 Silverado 4x4
    6" BDS Suspension Lift-3" Body Lift-Add A Leaf in rear -Trailmaster SSV Shocks-Duel Steering Stabilizer Kit -AirAid Cold air intake-
    4.56 Gears with Detroit Auburn Locker-Pro-Comp Traction Bars with duel shocks-Aluminum Skid Plate Kit-38.5" x 16.5" Mickey Thompson Baja Claws-Constant Dropping fuel gauge

    2005 Yukon XL Jet Power Programmer, Bilstein Shocks, Bilstein rear springs, Helwig Anti-sway bars, EGR Window Visors, EGR Hood Shield, Denali Headlights, Headlight harness upgrade, GE NightHawk Bulbs, White Night Rear lighting system, Russell Braided SS brake lines, PowerStop Brake pads, PowerStop cross drilled and Slotted Rotors, http://www.gmtruckclub.com/forum/sho...5-GMC-Yukon-XL
    2002 Silverado ext cab 2wd (Sold)
    2003 Yukon XL (Totaled)

  3. #13
    Jr. Apprentice
    Join Date
    Mar 2013
    Location
    Lynchburg Va
    Posts
    18

    Default

    They specialize in putting lifts and drop kits on trucks its the only place in my town where you can get lifts on

    - - - Updated - - -

    Here are a couple videos of the noise.

  4. #14
    Jr. Apprentice
    Join Date
    Mar 2013
    Location
    Lynchburg Va
    Posts
    18

    Default

    thats the sound it makes

  5. #15

    Default

    does the noise go away when you put it in 4wd?

    - - - Updated - - -

    It sounds a lot like the sound that @reggiecab2000 had on his truck. Here is his post and video. http://www.gmtruckclub.com/forum/sho...=reggiecab2000

    Try listening to the video in the above link and see if it sounds like yours.
    It turned out to be his transmission.

    - - - Updated - - -

    I have compared your vid and his multiple times. Thru my computer speakers they sound pretty close in sound. Yours seems slightly higher pitched.

    1995 Silverado 4x4
    6" BDS Suspension Lift-3" Body Lift-Add A Leaf in rear -Trailmaster SSV Shocks-Duel Steering Stabilizer Kit -AirAid Cold air intake-
    4.56 Gears with Detroit Auburn Locker-Pro-Comp Traction Bars with duel shocks-Aluminum Skid Plate Kit-38.5" x 16.5" Mickey Thompson Baja Claws-Constant Dropping fuel gauge

    2005 Yukon XL Jet Power Programmer, Bilstein Shocks, Bilstein rear springs, Helwig Anti-sway bars, EGR Window Visors, EGR Hood Shield, Denali Headlights, Headlight harness upgrade, GE NightHawk Bulbs, White Night Rear lighting system, Russell Braided SS brake lines, PowerStop Brake pads, PowerStop cross drilled and Slotted Rotors, http://www.gmtruckclub.com/forum/sho...5-GMC-Yukon-XL
    2002 Silverado ext cab 2wd (Sold)
    2003 Yukon XL (Totaled)

  6. #16
    Jr. Apprentice
    Join Date
    Mar 2013
    Location
    Lynchburg Va
    Posts
    18

    Default

    I don't know what it sounds like it 4wd. The truck didn't make this noise till I got the lift on I don't know if the drive shaft is not long enough or what

    - - - Updated - - -

    I don't know if the trans because it doesent slip or anything like that

  7. #17

    Default

    His did not slip either. It was a damaged bearing inside causing the noise. Do they sound the same to you?

    1995 Silverado 4x4
    6" BDS Suspension Lift-3" Body Lift-Add A Leaf in rear -Trailmaster SSV Shocks-Duel Steering Stabilizer Kit -AirAid Cold air intake-
    4.56 Gears with Detroit Auburn Locker-Pro-Comp Traction Bars with duel shocks-Aluminum Skid Plate Kit-38.5" x 16.5" Mickey Thompson Baja Claws-Constant Dropping fuel gauge

    2005 Yukon XL Jet Power Programmer, Bilstein Shocks, Bilstein rear springs, Helwig Anti-sway bars, EGR Window Visors, EGR Hood Shield, Denali Headlights, Headlight harness upgrade, GE NightHawk Bulbs, White Night Rear lighting system, Russell Braided SS brake lines, PowerStop Brake pads, PowerStop cross drilled and Slotted Rotors, http://www.gmtruckclub.com/forum/sho...5-GMC-Yukon-XL
    2002 Silverado ext cab 2wd (Sold)
    2003 Yukon XL (Totaled)

  8. #18
    Jr. Apprentice
    Join Date
    Mar 2013
    Location
    Lynchburg Va
    Posts
    18

    Default

    Somewhat but mine does not do it in reverse and his sounds like more of a clunking noise like sounds like something is hitting something else

  9. #19

    Default

    Quote Originally Posted by Pikey View Post
    His did not slip either. It was a damaged bearing inside causing the noise. Do they sound the same to you?
    i had a needle bearing go bad, yet even with that noise you could hear on mine, my truck drove perfectly fine, but with that noise i did not want to risk damaging anything else.

    how big of a lift did you get and how many miles do you have?

    i would say to do what i did, lift up the rear wheels and spins them with a friend in the drivers seat and listen around for where its coming from
    2000 Chevrolet Silverado

    Powertrain:
    4.3L V6, 4L60E, 2WD, Single Cab
    Performance:
    Airaid CAI
    Poweraid TB Spacer
    Flowmaster 10-series exhaust (dumped)
    BLACKBEAR TUNED!!!
    Edge CS insight monitor
    4.10 gears
    Limited-slip differential
    LS-1 Dual Electric fans
    Corvette tranny servo swap

    Audio:
    Head Unit: Alpine
    Speakers: Alpine SPR-60C 6.5" component set, 4X6 Infinity Kappas
    Subs: 2-12" Kicker CVT's
    Amps: Alpine-M1000 (subs), Alpine MRX-F65 (Speakers)


    Tires/Wheels:
    305/70R16 NITTO Terra Grapplers
    16" PROCOMP 7089's
    Suspension:
    2" leveling kit
    3" Fabtech Spindle Lift Kit
    Front/Rear-Bilstein 5100 shocks

    Lighting:
    FRONT
    35W HID Low Beams
    RECON LED smoked roof cab lights
    REAR
    HELLA LED taillights and 3rd brakelight
    HELLA FF-75 Aux. Reverse Lamps
    RIGID dually D2, flush mount, wide beam
    Accessories:
    Hawk HPS Brake pads
    Russell braided steel brake lines
    Powerstop-red powdercoated brake calipers
    Powerslot Cryo brake rotors
    EGR in-channel window visors

  10. #20
    Jr. Apprentice
    Join Date
    Mar 2013
    Location
    Lynchburg Va
    Posts
    18

    Default

    I got a 7 in lift with 315s and its got about 146k and I haha that's the problem I gotta buy a lift floor Jack to get the truck in the air and what would spinning the rear wheels do?

Page 2 of 4 FirstFirst 1234 LastLast

Similar Threads

  1. 06 chevy silverado 5.3L making weird tappin noise
    By jobrien836 in forum Chevy Silverado Forum (GMC Sierra)
    Replies: 10
    Last Post: 03-27-2012, 12:51 PM
  2. Weird "grumble" noise at part throttle...
    By travisn in forum Chevy Silverado Forum (GMC Sierra)
    Replies: 1
    Last Post: 11-10-2011, 09:47 PM
  3. 02 Silverado has weird buzz noise when it shifts?
    By bassfish18 in forum General Chevy & GM Tech Questions
    Replies: 3
    Last Post: 05-29-2011, 01:09 AM
  4. 04 Silverado Drip or Click (Weird Noise)
    By OneWheelWonder in forum General Chevy & GM Tech Questions
    Replies: 1
    Last Post: 01-23-2011, 11:35 AM
  5. weird noise
    By swoop in forum General Chevy & GM Tech Questions
    Replies: 0
    Last Post: 11-29-2009, 01:14 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •