Results 1 to 10 of 13
03-21-2013, 06:31 PM #1
Who has gone out and bought 15" wheels?
Rubber over rim is very important in the offroad line of trucks...
I was thinking of getting a set of these
cause they're simple, tough, 15x8, wheels. and light weight is also very important.
what tire sized did you wrap these in? I dont have much of a lift, and when I go camping the back almost sits lower than the front, but i want to go as big as i can for ground clearance, and traction.Gas was $1.83 when Obama took office.....
03-21-2013, 10:41 PM #2
On my stock height '98, I put a set of 32x11.50R15 that I think look pretty good on her. If you have a little bit of lift, I would expect you could easily go 33x12.50R15.'98 K1500 Suburban LS 5.7 L 4L60E NV246 ARB
'92 Ford Explorer XLT 4x4 4.0 L A4LD BW13-54 Trac-loc rear
"My toys were the greasy cogs and springs and pistons that lay around all over the place, and these, I can promise you, were far more fun to play with than most of the plastic rubbish children are given nowadays." Danny in Roald Dahl's Danny The Champion of the World
03-22-2013, 12:17 AM #3
- Join Date
- Mar 2007
- Grand Prairie, Texas
- Blog Entries
Last time I bought wheels and tires I found out it was cheaper to go with 16 or 17 inch wheels than 15s. Tires were cheaper too.
03-22-2013, 01:50 AM #4
On my 95 I had 38.5"x 16.5" on 15 inch rims. That was a lot of rubber. I never had to worry about a pot hole messing up my rim. The truck rode like it was on a pillow. When I would hit the sand dunes I would air them down to 8 psi. You could not tell that I let air out at all. It took forever to fill them back up
1995 Silverado 4x4
6" BDS Suspension Lift-3" Body Lift-Add A Leaf in rear -Trailmaster SSV Shocks-Duel Steering Stabilizer Kit -AirAid Cold air intake-
4.56 Gears with Detroit Auburn Locker-Pro-Comp Traction Bars with duel shocks-Aluminum Skid Plate Kit-38.5" x 16.5" Mickey Thompson Baja Claws-Constant Dropping fuel gauge
2005 Yukon XL Jet Power Programmer, Bilstein Shocks, Bilstein rear springs, Helwig Anti-sway bars, EGR Window Visors, EGR Hood Shield, Denali Headlights, Headlight harness upgrade, GE NightHawk Bulbs, White Night Rear lighting system http://www.gmtruckclub.com/forum/sho...5-GMC-Yukon-XL
2002 Silverado ext cab 2wd (Sold)
2003 Yukon XL (Totaled)
03-22-2013, 01:47 PM #5
"When I would hit the sand dunes I would air them down to 8 psi"
lol exactly, you can do that, and have less chance of poping a bead with 15" rims because the tire is acting like suspension at that point around the rim itself.
Im up in the air though between steel or aluminum... I did find a nice pair of 305/70 R16s for the stock wheels.... which is cool
but i have personally experianced steel rims being ruined by a good curbing, milled alluminum- leaking, and forged aluminum- cracking...
so im still kinda up in the air...
What kind of wheels did you invest in?
i just picked the nascar-steel... well, just because
03-22-2013, 02:01 PM #6
I think my were forged aluminum, but I am not sure, I don't even remember what brand they were and I am having a hard time finding them online they had an A/W on the center cap. Only issue I had with them was going thru deep mud and spinning them. The sand in the mud acted like sand paper and took the clear coat off of them. I beat the hell out of them and never cracked one. I mean beat the hell out of them.
03-22-2013, 03:09 PM #7
- Join Date
- Jan 2012
- New York
- Blog Entries
We run 265x75x17 on my sons k2500... any larger I believe you'd need a level or lift kit.2009 Chevy Silverado 2500HDLT 6.0L w/ Towing Package, Dick Cepek GM8 Rims, Dick Cepek FC II 33X11.50R17,RKSport Ram-Air Hood(Functional), Lazer Lite Aluminum Tonneau Cover, Road Armor Stealth Bumper, PIAA Lighting, Diablo Trinity Tuner, Diablew Custom Tune, BullyDog Cold Air Intake, American Racing Headers w/highflow cats, Corsa Performance Sport Exhaust, Custom Striping, Black Bowties front and rear, Fuel Grille Inserts, Recon Headlights, Readylift Shocks, Readylift Upper Contol Arms, 2" Blocks in the Rear..
Future Plans: HD Tie Rods, Under hood upgrades, Crower Camshaft and possibly electric fans.
04-11-2013, 06:12 AM #8
Im running pretty much those rims on my truck with 33x12.5x15 tire and I like how it rides havent gone off road yet this year with the new tires but the last ones I had were the same size and did just fine.
I've been kicking around the idea of getting a set of used Humvee tires to see how they do.1994 GMC Sierra 1500
4" Rancho Suspension Lift, 2" Body Lift
True Duals with Cherry Bombs, Brush Guard, Cowl Hood
Sold 2008 Silverado Crew Cab 4x4 Z71
05-29-2013, 12:36 PM #9
- Join Date
- May 2013
Your truck rode enjoy it was on the pillow. As i would hit the fine sand dunes I had air them into 6 psi. I beat the actual hell out of them and not cracked just one. I imply beat the actual hell out of them.
05-30-2013, 07:29 AM #10
I would agree you want the tire to prtoect the rim while offroading. But as has been stated before a 17" rim will be cheaper and you can still protect it. Say you go with a 12.50 or so wide tire. When you buy the rim buy an 8" wide rim. That differenc will give the tire a slight "bulge" look to it and it will save your rim. Never mind the cost will be less. On my truck now I have the stock 18's which I beleive are 8" wide. And I am running a 12.50.
2011 GMC Sierra SLE - 5.3 - 4X4 - Z71 - King Shock Level Kit - Body Color GMC grill emblem - 2 Tone Engine Cover, Rad Cover and Battery Box - Volant CAI - Tru Cool 40K tranny cooler - Sylvania ZXE bulbs Hi/Low -TriFold Hard Tonneau Cover- CoverCraft Seat Covers - Diablo inTune - GoRecon LED under rail lights - GoRecon LED White Lightning Tailgate Light Bar - Windows tinted to 45%- Kenwood DNX6990 - JL Audio C5-650 &650X- JL Audio Amp- Interco Truxus M/T 33x12.50x18
By Dana Joe in forum GM Electrical TechReplies: 10Last Post: 01-27-2013, 04:54 PM
By parts bot in forum Chevy Parts eBayReplies: 0Last Post: 01-10-2013, 08:50 PM
By MTM in forum Wheels & TiresReplies: 13Last Post: 04-17-2012, 11:13 AM
By gmcsierraz71 in forum Lifted & Offroad SuspensionReplies: 0Last Post: 06-18-2011, 08:19 AM
By ronhoward in forum Chevy Silverado Forum (GMC Sierra)Replies: 5Last Post: 02-15-2010, 06:57 PM