Results 1 to 2 of 2
Thread: Squeaking from Transfer Case?
03-27-2013, 02:44 PM #1
Squeaking from Transfer Case?
Hey everyone, gotta '93 4x4 K1500
My truck recently developed a squeak, it gets higher pitched as I drive and disappears over probably 30-35 mph
I jacked it up and spun the rear driveshaft and it seems like it's coming from the rear of the Transfer case, it sounds like a metal on metal squeak but i'm not sure, and turns into a chirp when I'm up to probably 25 mph. It also doesn't squeak when i'm in reverse.
I recently just filled the transfer case with fluid because it was almost dry. It still has a squeak, my question is, is it possibly the transfer case and the damage is already done? or is it something else and the low fluid was just a coincidence?
03-27-2013, 04:15 PM #2
are you sure that it is not a bad u-joint? Were did the fluid from your t-case go? Did you fix the leak
1995 Silverado 4x4
6" BDS Suspension Lift-3" Body Lift-Add A Leaf in rear -Trailmaster SSV Shocks-Duel Steering Stabilizer Kit -AirAid Cold air intake-
4.56 Gears with Detroit Auburn Locker-Pro-Comp Traction Bars with duel shocks-Aluminum Skid Plate Kit-38.5" x 16.5" Mickey Thompson Baja Claws-Constant Dropping fuel gauge
2005 Yukon XL Jet Power Programmer, Bilstein Shocks, Bilstein rear springs, Helwig Anti-sway bars, EGR Window Visors, EGR Hood Shield, Denali Headlights, Headlight harness upgrade, GE NightHawk Bulbs, White Night Rear lighting system, Russell Braided SS brake lines, PowerStop Brake pads, PowerStop cross drilled and Slotted Rotors, http://www.gmtruckclub.com/forum/sho...5-GMC-Yukon-XL
2002 Silverado ext cab 2wd (Sold)
2003 Yukon XL (Totaled)
By parts bot in forum Chevy Parts eBayReplies: 0Last Post: 09-09-2012, 03:50 AM
By rileyjr16 in forum GM PowertrainReplies: 3Last Post: 08-24-2012, 10:15 AM
By TXWagon in forum GM PowertrainReplies: 7Last Post: 07-20-2011, 04:01 PM
By tlavergne in forum GM PowertrainReplies: 2Last Post: 01-21-2011, 10:56 AM
By desertjoe in forum General Chevy & GM Tech QuestionsReplies: 2Last Post: 06-01-2010, 11:05 AM
Tags for this Thread