Results 1 to 10 of 11
04-13-2013, 11:26 PM #1
HID Conversion? Replace the stock bulbs in fog lights
Well I have these fog lights with crappy lights. So I wanna convert it over to HID or brighter lights so what am I looking at getting? Different gauge wires, new bulbs, new fuses?
2005 Chevrolet Silverado 1500 LS V8 4.8L Ext Cab Standard bed. K&N Air Filter, and Flowmaster Series 40 Muffler. 2 12"in JL audio subs, 1500w amp
2002 Ford F250 Lariat Powerstroke 7.3L Diesel Short Bed
2004 Chevrolet Suburban LT
04-14-2013, 07:44 AM #2
- Join Date
- Apr 2010
- Piermont,NY, back in Northern NJ now, But may be in IL soon....
Are those the Plastic housing?08 Z71 Avalanche Mods to date: K&N CAI,Hellwig Swaybars and End Links, Corsa Sport Exhaust, Superchips Programer,IPCW LOF & 3rd brake light and tails, AMI Gas door,Show Hooks and Door locks, Enkei Wheels, with Pirelli tires, StreetScene Bowties, Grant Steering wheel,Muth signal mirrors,SSBC Big Brake kit,Huskyliner Mug gards,Floor mats and Hood shield, McGard Lug nuts and locks, Bedrug, Cervini's Ram Air hood,35watt HID Fog lights, Sylvania bulbs all around ZXE's Highs and Lows, WhiteNight Back up lights,Sirius and HD Radio, SnugTop sitting on deck now Got a Softopper on now,Tempress Boat Hatches.... New Bilstein shocks are on... New Mods coming soon..... X
04-14-2013, 09:44 AM #3
- Join Date
- Jun 2006
- River Ridge Louisiana-4 miles W of New Orleans-didn't flood-water stopped 800 yards away.
If you can get them to work-True HID kits put out 2.5 to 3 times the light of our/your 55 watt halogen bulbs
and HID kits are dirt cheap now.
I put them on my Nissan Titan-worked great
After I sold it-bought the 98 Suburban(2007)
I tried to put them in the Suburban
Put Kit in-disabled DRL(pulled fuse)
NO LIGHT- well I put the kit on the side-couldn't find online seller-
Few days back I saw that a relay harness-$8-is commonly sold to
make Hid kits work better "and for some vehicles that the kits won't work on without"
I have that harness on the way.
My point-ASK the seller before you buy if your GM needs the harness-and if there is any trickery involving the daytime running lights.
My kit is the low beams-9006 or maybe 9005-
Most folks go low beams only-PLENTY of light.
And 4300 "TEMP" is the stock color-WHITE
If you go 6000K or above-you get weirder blue hue-then purple-and LESS LIGHT-
so don't go over 6000(slight blue) or 4300(white OEM color)-unless you are young and want to attract cop's attention.
1)So ask seller if you need harness
2)Ask about DRL
3) Get low beams
4) 4300 or 6000k colorLuck
PS Glad I didn't toss my kit-hope it didn't get beaten up much while "stored" for 6 years(stored -meaning under computer table and kitchen table-cats all over place-dog also-knocking things over)1998 suburban-
04-14-2013, 10:47 PM #4
The feel like a hard plastic and the lights literally only work to like 10ft. And thanks for all the help! I will look into it!
04-15-2013, 12:38 PM #5
Daytime running lights are only a problem if you're converting your factory headlights... Tie into your trigger and use a 12v source with a relay and an H3 HID kit (35w) and you will be completely fine. As was mentioned earlier, kelvin temperature dictates light color so be mindful of that.
BUT in all honesty, you won't notice much of a difference....
04-15-2013, 01:27 PM #6
I would be afraid that the HID bulbs would melt the housing.
1995 Silverado 4x4
6" BDS Suspension Lift-3" Body Lift-Add A Leaf in rear -Trailmaster SSV Shocks-Duel Steering Stabilizer Kit -AirAid Cold air intake-
4.56 Gears with Detroit Auburn Locker-Pro-Comp Traction Bars with duel shocks-Aluminum Skid Plate Kit-38.5" x 16.5" Mickey Thompson Baja Claws-Constant Dropping fuel gauge
2005 Yukon XL Jet Power Programmer, Bilstein Shocks, Bilstein rear springs, Helwig Anti-sway bars, EGR Window Visors, EGR Hood Shield, Denali Headlights, Headlight harness upgrade, GE NightHawk Bulbs, White Night Rear lighting system http://www.gmtruckclub.com/forum/sho...5-GMC-Yukon-XL
2002 Silverado ext cab 2wd (Sold)
2003 Yukon XL (Totaled)
04-15-2013, 02:17 PM #7
04-15-2013, 11:57 PM #8
If heat is your concern HID would actually be better (and actually ALOT brighter too), but if its plastic like Pikey is asking then going up on the wattage would be a bad idea...2000 Chevrolet Silverado
4.3L V6, 4L60E, 2WD, Single Cab
Poweraid TB Spacer
Flowmaster 10-series exhaust (dumped)
Edge CS insight monitor
LS-1 Dual Electric fans
Corvette tranny servo swap
Head Unit: Alpine
Speakers: Alpine SPR-60C 6.5" component set, 4X6 Infinity Kappas
Subs: 2-12" Kicker CVT's
Amps: Alpine-M1000 (subs), Alpine MRX-F65 (Speakers)
305/70R16 NITTO Terra Grapplers
16" PROCOMP 7089's
2" leveling kit
3" Fabtech Spindle Lift Kit
Front/Rear-Bilstein 5100 shocks
35W HID Low Beams
RECON LED smoked roof cab lights
HELLA LED taillights and 3rd brakelight
HELLA FF-75 Aux. Reverse Lamps
RIGID dually D2, flush mount, wide beam
Hawk HPS Brake pads
Russell braided steel brake lines
Powerstop-red powdercoated brake calipers
Powerslot Cryo brake rotors
EGR in-channel window visors
04-16-2013, 12:01 AM #9
04-16-2013, 12:57 AM #10
anyways, I think I will save my money. And use my trail techs or mount these an just not use em. Idk yet I'm stuck at the moment.
- - - Updated - - -
Couldn't find mine but here is the model that I got or at least one of the sets I have. Anyways check it out.
Last edited by Silverado 2005 LS; 04-16-2013 at 01:39 AM.
By 2k8z71 in forum Lighting DiscussionReplies: 4Last Post: 02-07-2013, 11:42 PM
By Curky in forum Audio, Video & Gadget TechReplies: 2Last Post: 07-13-2012, 01:41 PM
By 2091B22 in forum Audio, Video & Gadget TechReplies: 3Last Post: 02-01-2012, 01:22 PM
By Coneklr in forum Audio, Video & Gadget TechReplies: 0Last Post: 08-31-2009, 08:30 PM
By GPRacer in forum Chevy Truck AccessoriesReplies: 4Last Post: 01-30-2009, 04:29 PM