Results 21 to 23 of 23
04-10-2013, 03:25 PM #21
Unfortunately, Krylon is a step ahead of us. Their spray nozzles are solidly attached to the can. I have tried removing them before, and short of breaking it off, you can't do it.
Does anyone recall that there was once a refillable aerosol can for dispensing auto-quality paint? Is it still made, and was it any good?
04-14-2013, 05:59 PM #22
- Join Date
- Dec 2009
Man seeing those rims get painted gives me hope for my truck...I cant spend money on new rims...so seeing this I think I will paint mine black as well...I already have the white/black contrast going on with my truck so this would step it up...i just installed subwoofer/amp on it today (first time ever doing it) so as soon as the weather warms up I shall paint the rims too...awesome job!
04-14-2013, 10:32 PM #23
next after its all set and ready, here's what you do:
- 3or4coats of ETCHING PAINT
-3coats black paint
-3coats of clear coat
-1coat black paint
After this I let them set in sun for about 30mins.
And if you can use a air compressor to help dry the paint. But don't hold the nose close, hold it about 3-4ft above. And this should speed up the drying process.(hold it too close you blow a hole in the paint and fixing it is a pain.)
2005 Chevrolet Silverado 1500 LS V8 4.8L Ext Cab Standard bed. K&N Air Filter, and Flowmaster Series 40 Muffler. 2 12"in JL audio subs, 1500w amp
2002 Ford F250 Lariat Powerstroke 7.3L Diesel Short Bed
2004 Chevrolet Suburban LT
By SILVERADO123 in forum Chevy Silverado Forum (GMC Sierra)Replies: 1Last Post: 12-01-2011, 12:00 PM
By Kancer72 in forum Member IntroductionsReplies: 5Last Post: 09-13-2011, 08:47 AM
By sierraman in forum Lifted & Offroad SuspensionReplies: 1Last Post: 01-02-2008, 07:40 AM
By Steve in forum Chevy Blazer Forum (GMC Jimmy)Replies: 0Last Post: 06-29-2007, 08:26 AM