Results 1 to 4 of 4
04-05-2013, 05:41 PM #1
- Join Date
- Oct 2009
05 Suburban Z71 rear caliper carrier removal?
I have a warped rotor on the back and have the parts to replace it. I tore into it last weekend and got the caliper off and pads removed then the problems started. I was ready for a Torx bit bolt but it looked to be a 17mm bolt head. I got the 17mm socket but it wouldn't fit the head so I got 18 and it was to big. My friend gets a 11/16 and it doesn't fit either.
Is there a "special" socket from gm to get these out?
04-05-2013, 07:30 PM #2
Nope. A regular socket should fit it. regular sockets fit my 02 silverado, 03 yukon xl, and 05 yukon xl. You may have corrosion or dirt on the head causing your sockets not to fit
1995 Silverado 4x4
6" BDS Suspension Lift-3" Body Lift-Add A Leaf in rear -Trailmaster SSV Shocks-Duel Steering Stabilizer Kit -AirAid Cold air intake-
4.56 Gears with Detroit Auburn Locker-Pro-Comp Traction Bars with duel shocks-Aluminum Skid Plate Kit-38.5" x 16.5" Mickey Thompson Baja Claws-Constant Dropping fuel gauge
2005 Yukon XL Jet Power Programmer, Bilstein Shocks, Bilstein rear springs, Helwig Anti-sway bars, EGR Window Visors, EGR Hood Shield, Denali Headlights, Headlight harness upgrade, GE NightHawk Bulbs, White Night Rear lighting system http://www.gmtruckclub.com/forum/sho...5-GMC-Yukon-XL
2002 Silverado ext cab 2wd (Sold)
2003 Yukon XL (Totaled)
04-05-2013, 07:55 PM #3
- Join Date
- Jan 2009
- Norwalk, Ohio
- Blog Entries
Welcome to the club!!
Sounds like it's been rounded out, or like Pikey said it's all crudded up. I bought a set of rounded bolt sockets from harbor freight for $20.00, and they have saved me more than once. As a matter of fact I just had to use the 10mm, to remove a stripped bleeder screw out of a caliper.
- - - Updated - - -
From the factory they come with a T65 torx bit for the caliper bolts, but most people replace them with the hex head style bolts to avoid problems down the road. Auto Zone has them for $4.99 each, just replaced all of my last summer.2004 Chevy Colorado
LS1 5.7 swap/TBSS rear axle swap
04-06-2013, 06:11 AM #4
I just did my rear brakes last month. My six point impact socket set is metric so it must be a 17 or 18.2011 Chevy Silverado LT 4WD 25k miles
2001 Suburban 2WD, 5.3, V8 176k miles
By parts bot in forum Chevy Parts eBayReplies: 0Last Post: 02-25-2013, 04:40 AM
By frankiev in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 2Last Post: 11-15-2010, 08:15 PM
By tryimgtolearn in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 6Last Post: 05-30-2010, 08:17 PM
By rs6er in forum Lifted & Offroad SuspensionReplies: 0Last Post: 06-17-2009, 12:16 PM
By mainiac1 in forum GM PowertrainReplies: 2Last Post: 01-11-2009, 08:39 PM
Tags for this Thread