Results 1 to 10 of 10
Thread: is dual exhaust harm full?
04-08-2013, 11:53 AM #1
- Join Date
- Jan 2013
is dual exhaust harm full?
I got into a huge debate/argument about dual exhaust to dayin one of my college classes. I and another classmate were talking aboutexhaust upgrades and I said I wanted dual exhaust. A guy next to me chimed inand said just remove everything and put two pipes out the back with no muffleror anything. I began to explain that doing so would be harmful to the motorbecause the cylinders could not equal out causing major performance problems. Heand another guy got all upset saying it does not matter and if I was true thenhow do people run open headers on hot rods and such. Not having an answer tothat I gave up and quit talking. So who is right? Why do you need to put an xpipe in and how do the hot rods get away with having open headers. I have a2001 silverado 5.3L also
04-08-2013, 12:29 PM #2
I can't give you an exact answer. But, someone will come along that can. I can tell you that I had duels installed on my 1995 silverado. The guy did not install a crossover like he said he was going to. I lost power, it did not sound all that good and it ran crappy (idled rough). The pipe from the passenger side was a straight shot from the header to the muffler and out the back. The driverside pipe had to have multiple bends to go around things. The passenger side pipe would pop like crazy. After a week I could no longer stand it and took it back to the shop. The guy installed a x pipe, my power increased significantly, the idle smoothed out and the popping sound disappeared. I have seen many guys run with no muffler or cats, but they usually still have the factory y pipe. As far as open headers go on hot rods, I could be wrong on this, but the pressure would be equal because there is no pipe, just headers open to the atmospheric pressure.
1995 Silverado 4x4
6" BDS Suspension Lift-3" Body Lift-Add A Leaf in rear -Trailmaster SSV Shocks-Duel Steering Stabilizer Kit -AirAid Cold air intake-
4.56 Gears with Detroit Auburn Locker-Pro-Comp Traction Bars with duel shocks-Aluminum Skid Plate Kit-38.5" x 16.5" Mickey Thompson Baja Claws-Constant Dropping fuel gauge
2005 Yukon XL Jet Power Programmer, Bilstein Shocks, Bilstein rear springs, Helwig Anti-sway bars, EGR Window Visors, EGR Hood Shield, Denali Headlights, Headlight harness upgrade, GE NightHawk Bulbs, White Night Rear lighting system, Russell Braided SS brake lines, PowerStop Brake pads, PowerStop cross drilled and Slotted Rotors, http://www.gmtruckclub.com/forum/sho...5-GMC-Yukon-XL
2002 Silverado ext cab 2wd (Sold)
2003 Yukon XL (Totaled)
04-08-2013, 03:50 PM #3
- Join Date
- Jan 2012
- New York
- Blog Entries
I dont have scientific data... but straight dual exhaust will not damage the engine also long as it is tuned correctly (fuel mixture). Running to lean or rich could damage the engine. What the x-over pipe really does is even out back pressure allowing for easier tuning. My thoughts on no mufflers are is that there is not enough back pressure to allow exhaust temps to come up which created kind of a vaccum/cyclone effect to help pull the spent gases out at a rate allowing the engine to effectively burn all the fuel. Thats not enough back would lower gas mileage... basically because allot of the fuel ends up burning in the exhaust where it not building horsepower. Now running open headers and exhaust are fine for really high displacement engines where you want to get as much air/fuel thru the engine to get as much ponies as you can. That's my 2 cents.2009 Chevy Silverado 2500HDLT 6.0L w/ Towing Package, Dick Cepek GM8 Rims, Dick Cepek FC II 33X11.50R17,RKSport Ram-Air Hood(Functional), Lazer Lite Aluminum Tonneau Cover, Road Armor Stealth Bumper, PIAA Lighting, Diablo Trinity Tuner, Diablew Custom Tune, BullyDog Cold Air Intake, American Racing Headers w/highflow cats, Corsa Performance Sport Exhaust, Custom Striping, Black Bowties front and rear, Fuel Grille Inserts, Recon Headlights, Readylift Shocks, Readylift Upper Contol Arms, 2" Blocks in the Rear..
Future Plans: HD Tie Rods, Under hood upgrades, Crower Camshaft and possibly electric fans.
04-08-2013, 06:29 PM #4
A lot of people will tell you that an engine needs back pressure to breath properly, IMO, that's like you trying to breath through a hose. An engine is just an air pump, remove the exhaust completely and the engine will pump air more efficiently. That is why, a drag car, or a hot rod, will have open pipes, to get rid of the flow restrictions.
However, most of us do not drive in that fashion and our trucks (and cars) need exhausts; not just for the noise reasons, we require heat to burn off the pollutants The exhaust holds engine heat and, creates some heat from the restrictions and, of course, from the cat.
Because there is more pipe, and reduced flow, a dual pipe exhaust may not be as gas friendly as a single pipe. The improved efficiency may be offset by the heat sink effect of the additional metal.
Just to talk about the back pressure thing, the old 2 stroke (mix gas and oil) engines did require some back pressure, just to slow down the air flow, so there would be more complete burn.
And the x pipe; as someone suggested, it helps balance the two halves of the engine for smother operation, it will also change the sound of the exhaust, because there will be some sound wave cancelling going on.Ray
'09 Avalanche LTZ - Black
'05 Envoy XL (sold)
04-08-2013, 08:24 PM #5
Some good responses, so far. Add it all up and the answer is 'no', dual exhaust is not harmful, it's just different. It has some advantages such as looks, sound, and potentially less restricted air flow (which can mean more ponies) depending on implementation ... but it can also be more polluting and cause you to burn more fuel. (More air means more fuel ... which together mean more ponies ... if implemented well!)
It's all in what you like/want, really. If fuel econ and low pollution were a deal breaker for those of us on this forum, we'd be driving eco-friendly electrics/hybrids/solars and posting on some silly green go-kart forum instead of a truck forum.
04-08-2013, 09:43 PM #6
- Join Date
- Sep 2009
- Northern GA
- Blog Entries
Running open headers on our trucks can cause problems but as long as you got tubing past the cab you'll be fine. My cobra and 65 have exhaust cut out right under the driver and passenger seat but they are high performance motors. I used to run them on my old dodge and it never cause an issue but I lost tons of low end grunt2009 chevy 1500 z71 4x4
2.5 ccm level,2.5 inch rear blocks 305/60/18 coopers stt,Debadged,10 series flow w/dual exit in front or right rear tire, KN CAI, diablo InTune, 18% tint all the way around ,spec-d euro headlights with black housings,winjet smoke LED tail lights,putco LED third brake light smoked, fab fours front bumper with 10k warn winch, RK sports ram air hood
1965 c10 swb, zz4 350 with the hot cam and fast burn heads and a 780 Holley on top, richmond super street 5 speed,restorod
04-08-2013, 10:21 PM #7
- Join Date
- Jan 2013
Thank you all even though I feel like a d#*k for arguing with my class mates now lol
04-09-2013, 08:58 AM #8
It depends on several variables in the engine, on whether it will be good or bad for your engine. For a new GM Vortec 5.3, straight duals will have some impact on performance, as the firing order and cam timing, are not suited to it, and the stock components are not built to run the engine at 6000+ RPM constantly, as the engine in a drag car is.
The Corvette for example comes with dual exhaust, but does have a small cross-over H connector in the center pipe. It's a more performance oriented vehicle than a Silverado though.
Having the right exhaust design for the engine and vehicle application can contribute to improved performance, fuel economy, and sound. With straight dual exhaust, on your Silverado, you'll most likely sacrifice some MPG, and a slight loss in low RPM performance, for maybe a couple HP increase in the upper RPM range, and the deeper alternating burbling sound at idle and throughout the normal driving RPM range.
04-09-2013, 10:06 AM #9
- Join Date
- Jan 2009
- Norwalk, Ohio
- Blog Entries
I have been running a 97 firebird with an LT1 in it with open headers for two years now, I love the sound of it and have had no driveability issues with it at all.
On the other hand, I tried to run my LS1 with open headers and the ECM freaked out and had it running so rich it would burn your eyes, and it actually dripped gas out of the collectors. Older engines don't really mind, newer one's don't like open headers.2004 Chevy Colorado
LS1 5.7 swap/TBSS rear axle swap
04-09-2013, 12:42 PM #10
Of course, you could also retune the O2 sensors out, for off-road only use.
By parts bot in forum Chevy Parts eBayReplies: 0Last: 03-29-2013, 07:40 PM
By parts bot in forum Chevy Parts eBayReplies: 0Last: 03-20-2013, 10:40 PM
By stchman in forum Chevy Silverado Forum (GMC Sierra)Replies: 8Last: 02-16-2013, 01:12 PM
By parts bot in forum Chevy Parts eBayReplies: 0Last: 08-03-2012, 11:50 AM
By RyGuyGMC in forum Chevy Silverado Forum (GMC Sierra)Replies: 2Last: 03-16-2010, 09:39 AM
Tags for this Thread