GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 2 of 2
  1. #1

    Default replace lifters or clean?

    2000 K2500 454 173k miles

    Just need a few more answers on this subject. I've decided to give a cleaning one more try before I have to tear down the engine. So question 1: Should I try Seafoam in the oil or ATF? I am leaning toward Seafoam. How long should I leave it in? 500 miles? Right now I will have to drain some oil out because it is a quart overfull with the other additives that I put in already.

    Question 2: Do the lifters need to be replaced or can they be cleaned? What causes them to go bad? Do they get dirty and just stick in the cylinder or is there a seal inside that leaks?

    Money is tight, but I need my truck. If I need to replace them I will. Any help is appreciated, Thanks in advance. Andy

  2. #2

    Default

    1) Seafoam couldn't hurt. ATF will wash a lot of crud into the oil pump pickup, so I wouldn't recommend it.
    2) As for causes, they usually just wear out. If they're stuck, the Seafoam should help. As for replacing them, they're pretty cheap. It's just a little time-consuming. But I'd try cleaning them and adjusting the rocker arms first.
    ...
    ....

Similar Threads

  1. 97 vortec motor clogged lifters?
    By ninjaneer911 in forum Chevy C/K Truck Forum
    Replies: 2
    Last Post: 01-31-2012, 09:26 AM
  2. 8.1 roller lifters--stock?
    By Bluewater in forum General Chevy & GM Tech Questions
    Replies: 3
    Last Post: 10-30-2011, 01:23 PM
  3. Solid Lifters
    By Chevyboy96 in forum GM Powertrain
    Replies: 4
    Last Post: 03-03-2011, 06:10 PM
  4. what kind of lifters and cam to get?
    By Lifted_Bowtie in forum GM Powertrain
    Replies: 10
    Last Post: 12-26-2010, 03:19 AM
  5. lifters
    By Bobby1021 in forum General Chevy & GM Tech Questions
    Replies: 1
    Last Post: 03-30-2010, 07:57 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •