Results 1 to 10 of 16
Thread: Frame Repainting
04-16-2013, 08:42 AM #1
- Join Date
- Dec 2011
- Blog Entries
After 17+ years of dirty salty and wet New England winters much of the pint on my frame has warn away and in its place is surface rust. Later this spring I will be removing said rust and repainting the frame with flat black Rustoleum and a few layers of clear coat. I'm just wondering what the best method for this would be. I will try to remove all the parts I can to paint them as well.
My method was going to be sand and brush off all the rust I can then tape/cover all I don't want black and first coat it with Rustoleum primer then a few coats of flat black and finish with 2-3 coats of clear. Anything else I should do?
1996 Chevy Tahoe LT 5.7L V8 4X4 205,000+ miles. Built proudly at Janesville Assembly in Janesville, Wisconsin
Basic mods: Lights all over, bunch of electrical work, and a couple cooling mods.
Check out my other mods in My Garage: http://www.gmtruckclub.com/forum/sho...t-Tahoe-4-Door
By Shovelaynut in forum Chevy C/K Truck ForumReplies: 3Last Post: 07-01-2011, 08:23 PM
By 2wheelmudder in forum Lifted & Offroad SuspensionReplies: 3Last Post: 05-19-2011, 02:32 AM
By Cuda1500 in forum Lifted & Offroad SuspensionReplies: 5Last Post: 08-06-2010, 09:39 PM
By coombia21 in forum Chevy Truck AccessoriesReplies: 3Last Post: 09-20-2009, 03:01 PM
By bd1326 in forum General Chevy & GM Tech QuestionsReplies: 1Last Post: 05-17-2009, 01:34 PM