Results 11 to 16 of 16
Thread: Frame Repainting
04-17-2013, 04:49 PM #11
I really don't care about if it shines I was using the clear coat to further protect the frame and paint. Currently I have a B&D rotary tool, 4 1/2 inch Ryobi grinder, a sander, multi tool sander and drill mountable wire brushes. I will need more sanding pads and brushes and now knowing about the poly ones I'll check them out so I can have both metal and poly.
@Surreal I follow the directions on the cans which say exactly what you did but I wait closer to 30-40 mins because I make my coats a little heavy. The longest part will be the removal of rust and components because the sanding take a while but I will have friends helping me out so we have multiple tools going at the same time.
Question can the axle and suspension be painted as is or is there other prep I will need.(Besides the obvious of taping off/covering components I don't want painted.)
1996 Chevy Tahoe LT 5.7L V8 4X4 205,000+ miles. Built proudly at Janesville Assembly in Janesville, Wisconsin
Basic mods: Lights all over, bunch of electrical work, and a couple cooling mods.
Check out my other mods in My Garage: http://www.gmtruckclub.com/forum/sho...t-Tahoe-4-Door
04-19-2013, 08:07 AM #12
Also while I do this work I will likely do some suspension work as well, where can I get new front and rear suspension stops because mine are rotted out.
04-19-2013, 12:12 PM #13
1995 Silverado 4x4
6" BDS Suspension Lift-3" Body Lift-Add A Leaf in rear -Trailmaster SSV Shocks-Duel Steering Stabilizer Kit -AirAid Cold air intake-
4.56 Gears with Detroit Auburn Locker-Pro-Comp Traction Bars with duel shocks-Aluminum Skid Plate Kit-38.5" x 16.5" Mickey Thompson Baja Claws-Constant Dropping fuel gauge
2005 Yukon XL Jet Power Programmer, Bilstein Shocks, Bilstein rear springs, Helwig Anti-sway bars, EGR Window Visors, EGR Hood Shield, Denali Headlights, Headlight harness upgrade, GE NightHawk Bulbs, White Night Rear lighting system, Russell Braided SS brake lines, PowerStop Brake pads, PowerStop cross drilled and Slotted Rotors, http://www.gmtruckclub.com/forum/sho...5-GMC-Yukon-XL
2002 Silverado ext cab 2wd (Sold)
2003 Yukon XL (Totaled)
04-19-2013, 06:54 PM #14
I'm surprised they cost so much and look nothing like the factory ones. LMC has the rears for 10 each side. Where else might I find them... Amazon has nothing.
04-19-2013, 08:33 PM #15
- Join Date
- Jan 2009
- Norwalk, Ohio
- Blog Entries
I buy 99% of my stuff now through Rockauto, but pay attention to the shipping costs after you add it too the cart.2004 Chevy Colorado
LS1 5.7 swap/TBSS rear axle swap
04-19-2013, 08:54 PM #16
By Shovelaynut in forum Chevy C/K Truck ForumReplies: 3Last Post: 07-01-2011, 07:23 PM
By 2wheelmudder in forum Lifted & Offroad SuspensionReplies: 3Last Post: 05-19-2011, 01:32 AM
By Cuda1500 in forum Lifted & Offroad SuspensionReplies: 5Last Post: 08-06-2010, 08:39 PM
By coombia21 in forum Chevy Truck AccessoriesReplies: 3Last Post: 09-20-2009, 02:01 PM
By bd1326 in forum General Chevy & GM Tech QuestionsReplies: 1Last Post: 05-17-2009, 12:34 PM
Tags for this Thread