Results 1 to 3 of 3
Thread: Engine not starting
04-29-2013, 11:16 PM #1
Engine not starting
I have a 1999 Chevy C1500 with a 5.7 and I recently swapped frames(the only thing done to the engine was it being pulled, I did no other work on it), well I hook everything back up(used wiring diagrams to double check) and now its giving off an intermittent spark from the coil. And will not start at all. Any ideas?
Last edited by Arbitert343GS; 04-29-2013 at 11:34 PM.Brandon - Georgia
1999 Chevy C1500
1978 Pontiac Trans Am
04-30-2013, 12:21 AM #2
- Join Date
- Mar 2007
- Grand Prairie, Texas
- Blog Entries
Either a bad coil, bad positive connection, or bad ground.
Double check your connections, I suspect the coils good but you either have a loose ground or you might have internally damaged a wire during assembly.
04-30-2013, 08:03 PM #3
Thank you for the help! It ended up being condensation in my distributor. I got it running earlier after I let it dry out.
By rwmoorh in forum General Chevy & GM Tech QuestionsReplies: 5Last: 07-08-2010, 12:05 PM
By kcstrom in forum General Chevy & GM Tech QuestionsReplies: 3Last: 08-25-2009, 08:54 PM
By Trask215 in forum Chevy Silverado Forum (GMC Sierra)Replies: 10Last: 05-25-2009, 09:08 PM
By Trask215 in forum Chevy Silverado Forum (GMC Sierra)Replies: 5Last: 12-07-2008, 11:41 AM
By ImpetuousNinja in forum Performance & FuelReplies: 4Last: 05-30-2008, 10:59 PM
Tags for this Thread