GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 10 of 13

Hybrid View

  1. #1

    Default Need brake help; soft pedal

    need help put in a new master to fix soft brake pedal no good keep going to the floor bleed them 1/2 of gallon
    of fulid all 4 no good can u help,

  2. #2
    Legend


    mfleetwood's Avatar
    Join Date
    Jul 2010
    Location
    Denver, CO
    Posts
    7,213
    Blog Entries
    1

    Default

    Welcome to the Club!!!

    I moved your thread to the correct section and modified your title to fit your topic. This will help you in getting more response/opinions.

    Good Luck!


    Mike (Denver, CO) - 2008 Sierra 1500 Z71 SLE 5.3L 4WD

    SUSPENSION: Rancho 4" Suspension Lift; Rancho RS9000XL Shocks; Rancho Skid Plates; Rancho MyRide Wireless Shock Controller;
    TIRES:
    BFG All Terrain KO 315/70/17
    DRIVE TRAIN: 4.56 Gears; Detroit TrueTrac Differential; True Cool 40k Transmission Cooler
    PERFORMANCE: DiableSport Predator Tuner; Custom Tuned by Diablew; Magnaflow Exhaust; AFE Cold Air Intake
    ELECTRONICS: Kenwood DNX6180 Touchscreen; Subthump box w/10" Kicker; Driver Information Center (DIC); Rear View Camera
    ACCESSORIES: Westin Brush/Grill Gaurd; Westin Nerf Bars; Truxedo Tonneau; 20% Tint; Tow Mirrors w/Heat & Signals

  3. #3

    Default

    did you bench bleed it before you installed it? if not then that is most likely your issue.

    1995 Silverado 4x4
    6" BDS Suspension Lift-3" Body Lift-Add A Leaf in rear -Trailmaster SSV Shocks-Duel Steering Stabilizer Kit -AirAid Cold air intake-
    4.56 Gears with Detroit Auburn Locker-Pro-Comp Traction Bars with duel shocks-Aluminum Skid Plate Kit-38.5" x 16.5" Mickey Thompson Baja Claws-Constant Dropping fuel gauge

    2005 Yukon XL Jet Power Programmer, Bilstein Shocks, Bilstein rear springs, Helwig Anti-sway bars, EGR Window Visors, EGR Hood Shield, Denali Headlights, Headlight harness upgrade, GE NightHawk Bulbs, White Night Rear lighting system, Russell Braided SS brake lines, PowerStop Brake pads, PowerStop cross drilled and Slotted Rotors, http://www.gmtruckclub.com/forum/sho...5-GMC-Yukon-XL
    2002 Silverado ext cab 2wd (Sold)
    2003 Yukon XL (Totaled)

  4. #4

    Default

    Quote Originally Posted by Pikey View Post
    did you bench bleed it before you installed it? if not then that is most likely your issue.
    this was my thought. The master needs to be bench bled first.
    David
    2004 Silverado 2500 Crew Cab 4x4, AMSOIL EA air filter, Granatelli MAF sensor, Throttle body spacer, Magnaflow exhaust (true dual to 2 in 1 out muffler), 6" ProComp lift (add a leaf and 5" superlift rear block), Bilstein shocks, 35's (Cooper Disoverer ST) and 4.10 gears, Rhino Liner, EGRUSA fender Flares and widow visors, extended stainless steel brake lines, firestone airbags w/onboard air compressor, Pioneer Avic X940BT navigation, Accel backup camera.
    http://www.gmtruckclub.com/forum/sho...Silverado-2500
    1960 Land Rover Series II 88
    2001 Pontiac Sunfire
    2013 Toyota Avalon Limited (Wife's Car)
    NRA Life Member

  5. #5

    Default

    same issue on my truck, though i paid someone to do it... so you can imagine my frustration.

    i had 3 different shops bleed the truck, including the chevy dealership before we find a wheel clynder was cracked!
    after changing it and trying again the pedal seemed to be fixed........ now im back to square one with a mushy as hell pedal... new master, new rubber lines for the calipers and axle, and new wheel clynder...

    its obvious there is air in the system but how its creeping in perplexing... pisses me off... any ideas?
    Gas was $1.83 when Obama took office.....

  6. #6

    Default

    After this I might think that there is possible a soft spot in a brake line. so when you step on the brake the rubber hose bulges/expands. Not sure the easiest way to inspect this other than having someone put pressure on the lines and then visually inspect. Also maybe physically squeeze the lines to check for softness (similar to a radiator hose). I would think if there was somewhere that was allowing air in it would also leak fluid out.

  7. #7

    Default

    What year is the truck? I'm not an expert with master cylinders but many are vacuum assisted. Be sure the all hoses are good and do not have any vacuum leaks.
    2009 Chevy Silverado 2500HDLT 6.0L w/ Towing Package, Dick Cepek GM8 Rims, Dick Cepek FC II 33X11.50R17,RKSport Ram-Air Hood(Functional), Lazer Lite Aluminum Tonneau Cover, Road Armor Stealth Bumper, PIAA Lighting, Diablo Trinity Tuner, Diablew Custom Tune, BullyDog Cold Air Intake, American Racing Headers w/highflow cats, Corsa Performance Sport Exhaust, Custom Striping, Black Bowties front and rear, Fuel Grille Inserts, Recon Headlights, Readylift Shocks, Readylift Upper Contol Arms, 2" Blocks in the Rear..

    Future Plans: HD Tie Rods, Under hood upgrades, Crower Camshaft and possibly electric fans.

Similar Threads

  1. 2001 Suburban soft brake pedal compared to 2011 Silverado
    By bazar01 in forum Chevy Suburban Forum (GMC Yukon XL)
    Replies: 2
    Last: 02-04-2013, 09:57 AM
  2. soft brake pedal ~ 99 K1500
    By 99 Z71 in forum Lifted & Offroad Suspension
    Replies: 8
    Last: 05-03-2011, 05:54 AM
  3. soft brake pedal!
    By kuz6954 in forum Chevy Silverado Forum (GMC Sierra)
    Replies: 5
    Last: 03-02-2010, 11:31 AM
  4. Engine Missing/Brake pedal soft
    By lonewolf9861 in forum Member Introductions
    Replies: 0
    Last: 12-28-2009, 02:17 AM
  5. 04 silverado soft brake pedal
    By Rob L. in forum Lifted & Offroad Suspension
    Replies: 3
    Last: 10-29-2009, 02:16 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •