Results 11 to 17 of 17
05-03-2013, 08:29 AM #11
- Join Date
- Jan 2009
- Norwalk, Ohio
- Blog Entries
My 01 s10 I had was indestructable, the little 4.3 took a hell of a beating. 100,000 never cracked the motor open for anything. I agree with the seat adjuster though, I fixed two of them on a friends 99 Jimmy.2004 Chevy Colorado
LS1 5.7 swap/TBSS rear axle swap
05-05-2013, 10:46 AM #12
- Join Date
- Mar 2013
- Lacey wa
Hello there I would do it, I got my gf a 97 s10 blazer at 93,000 and we been the meanest to but at 130 i still haven't put anything but oil and new tires it runs and drives real good
05-13-2013, 09:42 AM #13
OK, I keep hearing about the front end going bad on these. So, what are we talking about here. Front (lower&upper Ball Joint) Tie rod, Idler arm. Can some give me a list of the parts that would be needed? I need to figure out the price of all of this. Thanks for you help. @Pikey ?? maybe you could help?Tim Walters (Curky)
Wrangler AT/S 265/70R17 - Trail-FX window vents - Husky fitted splash guards - Silver Star zXe - Leveling kit -
05-13-2013, 09:57 AM #14
I know of issues with the front wheel hubs in them. Other than that, if you wanted to do a complete rebuild you would need: upper and lower ball joints, inner and outer tie rod ends, idler arm, and pitman arm. (front shocks if you want). you may want to also consider replacing the control arm bushings, the uppers are pretty easy, I believe that the lowers require removal of the torsion bars to get the lower control arm off.
Last edited by Pikey; 05-13-2013 at 10:15 AM.
1995 Silverado 4x4
6" BDS Suspension Lift-3" Body Lift-Add A Leaf in rear -Trailmaster SSV Shocks-Duel Steering Stabilizer Kit -AirAid Cold air intake-
4.56 Gears with Detroit Auburn Locker-Pro-Comp Traction Bars with duel shocks-Aluminum Skid Plate Kit-38.5" x 16.5" Mickey Thompson Baja Claws-Constant Dropping fuel gauge
2005 Yukon XL Jet Power Programmer, Bilstein Shocks, Bilstein rear springs, Helwig Anti-sway bars, EGR Window Visors, EGR Hood Shield, Denali Headlights, Headlight harness upgrade, GE NightHawk Bulbs, White Night Rear lighting system http://www.gmtruckclub.com/forum/sho...5-GMC-Yukon-XL
2002 Silverado ext cab 2wd (Sold)
2003 Yukon XL (Totaled)
05-13-2013, 10:05 AM #15
- - - Updated - - -
Pitman arm ?????
05-13-2013, 10:37 AM #16
I listed pitman arm.
- - - Updated - - -
I am a firm believer in replacing front end parts that raise any sort of suspicion before installing new tires. I completely rebuilt the front end of my 2002 (everything but a new rack) at 100,000 miles. I planned on keeping the truck for a long time and did not want to burn thru a set of $1000 tires. I ended up selling the truck with around 135,000 on it. I can tell you that every person that drove it commented on how tight the front end was compared to other 2002 silverados that they drove.
05-14-2013, 09:59 AM #17
This is pretty hard finding a ok SUV for under $4000. Most are FORD's my wife keeps telling me to get over it and I told her it is not parking in our drive way. lol I am going to look at a couple of Jeeps today.(NOT Wranglers) That would be cool, because when she goes to school I get to keep it, lol
By zachary23 in forum Chevy Blazer Forum (GMC Jimmy)Replies: 8Last Post: 09-03-2010, 10:13 PM
By letisports in forum Member IntroductionsReplies: 9Last Post: 06-22-2009, 10:11 PM
By willbur in forum General Chevy & GM Tech QuestionsReplies: 12Last Post: 02-18-2009, 06:50 PM