I was originally thinking about getting spacers to level the truck then stacking another set and adding a leaf in the back .
Can you stack spacers or is that a no no?
Alexander
2000 silverado 1500 2wd
black racing stripes
black bowtie
k&n cold air intake
bull bar
6 pilot off road lights on a Go Rhino! Lightning Sport Bar
summit race muffler
with fish tailed exhaust pipes
P.A system (for when the aliens take over)jk
MB Gunner6 rims (discount tire brand)
285 bfg at ko's
mossy oak seat covers
3inch rough country lift



you could but I would never do it on my truck.... what kind of truck are you planning to lift?
PETE
95 GMC Sierra 2500
3" Body Lift, 33" Goodyear MTR's
5.7L 350 TBI Edelbrock SDT Exhaust, Flowtech Headers, K&N Intake
Sold :(
1999 Jeep Cherokee, 3" Rustys lift, 33" BFG MT's, locked, armored: Rolled :(
2000 Jeep Grand Cherokee Limited. K&N Intake, Custom Kolak Exhaust
Contact this GMTC Moderator for any problems or questions you may have
Join the GMTC Facebook Group!!! Join Here
Theroretically, anything can be done. I would advise against stacking spacers for safety reasons, but its your truck. Check out the JKS ACOS (google it), they are adjustable front spring spacers and will level out your ride.
I believe they are adjustable to 2.5" , but don't quote me on that. We installed a set in my buddy's 1999 Jeep a few months ago. Check to see if they have them for your application.
1972 chevy p/u - 454 engine - work in progress
1999 'burb - wife's vehicle
1976 Jeep CJ5- Dana 60 front and rear, locked, 350 engine, GM 3 spd, Atlas II T/C, 8" lift on 38's
2003 Jeep TJ- Dana 44 rear Dana 30 front, ox lockers front and rear 3.5" lift on 33's - My DD
J.E.E.P.-------->
Just
Empty
Every
i wouldnt stack spacers, 2.5 inches is the maximum you can go with spacers without having to change the upper control arms, however if your looking to lift your truck cheaply around the 4 or 5 inch mark you could go with 3inch lift spindles with the spacers, this way you wont have to change out anything except for maybe new shocks, should only run about 400 which is cheap for 4 or 5 inches of lift
Andrew
2006 gmc sierra, 4.8l, gibson headers, flowmasters exhaust, hypertech power programmer,4.10 gears, 3 inch rough country suspension lift w/ 285/70/17 cooper disoverer stt's, tinted windows, westin grill gaurd, herculiner bedliner, black fender flares, HID headlights,black painted front bumper
Bookmarks