Results 1 to 3 of 3
05-10-2013, 12:38 PM #1
- Join Date
- May 2013
99 chevy 2500 no fuel to the rail issue.... need help fast!!
okay heres my problem. i got a great deal on a 1999 chevy 2500 6.0l gas, the fuel lines rusted out. so i replaced them, and now it cranks and i can here the fuel pump kick on. but it doesnt push fuel to the rails. i know im getting spark. can someone get me a diagram of all the fuel lines so i can double check that their all going to the right place. does any one know whats going on?
05-10-2013, 03:32 PM #2
remove the fuel filter and place a pressure gauge on the pump line side should be 60 psi [or more] with the pump run of 2 sec.also should hold pressure.
you don't need a diagram because the lines are of a different size.vapor the largest/ return the smallest.
05-10-2013, 05:36 PM #3
The flex lines that run up the back of the engine can rust inside or catch crap and plug up. Take off all the lines you can and back blow with air. Do not let it blow back into the filter or pump though.01' 1500 LT Z71 ECSB 5.3L
line-x'd front brush guard with KC Daylighters, 6000k HID lows and highs, rewired highbeams, Trans-go mild shift kit, custom stainless duals, 3500 dually OEM taillights, K&N CAI. Still have OEM fender flairs and leveling kit in boxes waiting for time.
By lilgoat11 in forum GM PowertrainReplies: 0Last Post: 10-27-2011, 09:55 PM
By dkeys23 in forum General Chevy & GM Tech QuestionsReplies: 9Last Post: 07-26-2011, 08:59 PM
By TRyan9441 in forum Chevy Tahoe Forum (GMC Yukon, Cadillac Escalade)Replies: 2Last Post: 06-02-2011, 12:19 PM
By Steve in forum Chevy Trucks For Sale eBayReplies: 0Last Post: 03-01-2010, 07:40 PM
By JOHNNYBLACKEYE in forum GM PowertrainReplies: 2Last Post: 02-08-2010, 11:04 AM
Tags for this Thread