GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 4 of 4
  1. #1
    Sr. Apprentice Bigmacnchez's Avatar
    Join Date
    Oct 2010
    Location
    Granbury Tx, Fort Worth Tx
    Posts
    38

    Default Please I need help freash are servo

    I'm guessing the recirculation actuator has gone bad. It will not switch from outside air and inside air. Does anyone know how to replace or how to bypass and leave it on recirculation.
    2005 Chevy Silverado 1500HD 6.0 BBK headers,Cold air intake, Flowmaster cat-back, Diablo Trinity tuner, 22" KMC Rockstar Cooper ATZ, Kenwood DNX-9980HD indash, 2 Kenwood XR-W10F under back seat, Kicker 11DX10001, Kenwood KAC-7205, Polk Audio DXi6500 6.5"Component Speaker System front and back, Smoked out lights, 12K Hid's HI/Lo. Code Alarm W/remote start.

  2. #2

    Default

    Quote Originally Posted by Bigmacnchez View Post
    or how to bypass and leave it on recirculation.
    You can not leave it on recir (well I guess you could, but it is not designed to be in recir for all mode positions). Only some of the modes (vent/defrost/floor) will normally allow recir (and, I don't recall which ones permit recir). For example, defrost will not let you add recir, without exterior air, the moisture will not reduce.

    Sorry, I do not know how difficult it is to change that actuator, some require the removal of the dash.
    Ray

    '09 Avalanche LTZ - Black
    '05 Envoy XL (sold)

  3. #3
    Sr. Apprentice Bigmacnchez's Avatar
    Join Date
    Oct 2010
    Location
    Granbury Tx, Fort Worth Tx
    Posts
    38

    Default

    I should have done a write up on it. It was a pain in the a$$ for sure. I changed but was not the problem going to check wires. The servo it's behind the pass airbag by the fire wall. Have to take the dash cover off. Here is a link I found to remove dash cover http://www.sparkys-answers.com/2011/...ash-cover.html

    - - - Updated - - -

    I have changed the servo, hvac controls, checked the wiring, checked the fuses, checked the door nothing has worked. Next question is there a relay or switch I need to check? And could it be a problem with the PCM or body control module?
    2005 Chevy Silverado 1500HD 6.0 BBK headers,Cold air intake, Flowmaster cat-back, Diablo Trinity tuner, 22" KMC Rockstar Cooper ATZ, Kenwood DNX-9980HD indash, 2 Kenwood XR-W10F under back seat, Kicker 11DX10001, Kenwood KAC-7205, Polk Audio DXi6500 6.5"Component Speaker System front and back, Smoked out lights, 12K Hid's HI/Lo. Code Alarm W/remote start.

  4. #4

    Default

    I don't have a copy of your wiring schematic but, you need battery and ground to operate the actuator. Battery from a fuse (probably under the hood fuse panel), the fuse should be labeled HVAC# (the # for 1 through 8, or higher).

    The ground is provided by the HVAC control module.

    Do you have the automatic HVAC, or the manually operated HVAC?
    Ray

    '09 Avalanche LTZ - Black
    '05 Envoy XL (sold)

Similar Threads

  1. 4L60E on 2008 Sierra - Corvette servo or Super Servo?
    By sstoner911 in forum GM Powertrain
    Replies: 2
    Last Post: 07-26-2011, 03:55 PM
  2. Vette servo with sonnax4th gear billet servo?
    By 03ChevyRidinHigh in forum GM Powertrain
    Replies: 4
    Last Post: 05-08-2011, 07:08 PM
  3. Corvette Servo
    By bzboardco in forum GM Powertrain
    Replies: 7
    Last Post: 10-16-2010, 06:53 AM
  4. corvette servo
    By plowxman in forum GM Powertrain
    Replies: 1
    Last Post: 04-27-2009, 09:59 AM
  5. Vette servo
    By heavy chevy in forum Performance & Fuel
    Replies: 1
    Last Post: 03-12-2009, 08:11 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •