Results 1 to 10 of 25
05-14-2013, 10:41 PM #1
NNBS silverado tow mirrors on NBS silverado
and its done!
but theres good news and bad news...
anyone notice the UNsymmetricalness of the two mirrors here?
heres a better view...
obviously something isnt right, i contacted the company that i bought these from and am hoping they will respond soon, because its is the little things like this that irritate the heck outta me...
but overall, I freaking love these things!!!! I can see so much amazingly better and can now utilize my passenger side to parallel park and see my right rear tire and how close it gets to the curb, I am in love with these things, but obviously i would be 100% satisfied were it not for this flaw...
I do plan on doing the tow mirror leveling mod to just for aesthetics purposes and I will post whenever I do it.
cheers!2000 Chevrolet Silverado
4.3L V6, 4L60E, 2WD, Single Cab
Poweraid TB Spacer
Flowmaster 10-series exhaust (dumped)
Edge CS insight monitor
LS-1 Dual Electric fans
Corvette tranny servo swap
Head Unit: Alpine
Speakers: Alpine SPR-60C 6.5" component set, 4X6 Infinity Kappas
Subs: 2-12" Kicker CVT's
Amps: Alpine-M1000 (subs), Alpine MRX-F65 (Speakers)
305/70R16 NITTO Terra Grapplers
16" PROCOMP 7089's
2" leveling kit
3" Fabtech Spindle Lift Kit
Front/Rear-Bilstein 5100 shocks
35W HID Low Beams
RECON LED smoked roof cab lights
HELLA LED taillights and 3rd brakelight
HELLA FF-75 Aux. Reverse Lamps
RIGID dually D2, flush mount, wide beam
Hawk HPS Brake pads
Russell braided steel brake lines
Powerstop-red powdercoated brake calipers
Powerslot Cryo brake rotors
EGR in-channel window visors
05-15-2013, 09:20 AM #2
I can't tell if it's the angle of the photos or the mirrors that causes it to look like this. I'm thinking it's the angle of the photos, because if you look at your photo with OEM mirrors, they look asymmetrical, too.
05-15-2013, 09:49 AM #3
also, for the new ones its that last picture, from the top view, that really shows you something is different between the two...
05-15-2013, 08:20 PM #4
looks good. im assuming you checked all of the mounting area? one of mine didnt want to sit right until i did some wiggling on it.
2011 GMC Sierra SLE 5.3 Z71 4X4 Stealth Gray Metallic / 2004 Chevy Impala LS 3.8 Cappuccino
Tow mirrors - Diablew Tuned - Flowmaster Regular 40 - Ready Lift 2.5' lift - BFG LT A/T K/Os - Carr Light Wing - TruckLite LED lights - Optima Red Top - 50% Front Window Tint - Line-X bedliner - Airaid MIT - Tekonsha P2 - ARS Billet Grill - Fia custom fit seat covers
05-15-2013, 08:31 PM #5
I can't tell which is wrong, I think it's the driver's side. But, I'm with @Sierraowner5.3 I think one side is not quite in place.Ray
'09 Avalanche LTZ - Black
'05 Envoy XL (sold)
05-15-2013, 08:42 PM #6
if i could get an angle finder....
assuming the side of the truck is a straightline forward, I bet the drivers side mirror sits at about 75 degrees, while the passenger side mirror sits at about 45-50 degrees.... if yall get what im saying, i dont really know which one is wrong seeing that it could be either lol
05-16-2013, 07:27 AM #7
you can adjust the angle the mirrors sit on the truck. not entirely sure thats what you are referring to. the up down angle looks off as well.
wish i could see it in person.
05-16-2013, 08:02 AM #8
Are you referring to up & down or front & back? Maybe both? lol
I know this write up can help the up and down.
How To Level Tow Mirrors2002 Chevy Silverado & 1995 Ford Bronco
02 Silverado: 50K miles, 20" Motto Rims, Flowmaster 50 Series
95 Bronco: 160K miles, 4" Superlift, 33/12.5/15 Mickey Thompson
01 Civic: 75K miles, DD
05-16-2013, 11:15 AM #9
i know the up and down can be leveled, i will be doing that later, but its the open angle im talking about, like the angle in which they are positioned outward from the truck
05-16-2013, 03:38 PM #10
After looking at pictures of a bunch of trucks for sale with those mirrors, that seems to be the way GM had them on the 06-07classic trucks as well. My duramax has the older generation of trailer mirrors - the manual "camper type mirrors" not the power folding ones, and the passenger mirror of that style also sits at a narrower angle. I think it has to do with making the mirror more visible to the driver. If the mirror were more flat, you would have to have the glass tilted really far inward, which would expose the edge and possibly the back of the glass on the outside edge while the inside edge of the mirror body would block your view of the inside edge of the mirror. Just my opinion on why this is, since it appears to me to be normal.
2008 FORD F350. My new all-around truck.
2001 Silverado Reg. Cab Not-So-Base -- SOLD
2003 Avalanche Z71. No Cladding. Check out my Mod thread. - Crashed. Will be rebuilt soon.
1974 Triumph Spitfire 1500 - Work in Progress
2003 Sierra 3500 Duramax. The Newer, Better Work Truck -- FOR SALE
By parts bot in forum Chevy Parts eBayReplies: 0Last: 10-06-2012, 04:20 AM
By Rockstarrchevy81 in forum Audio & Video ClassifiedsReplies: 0Last: 01-26-2012, 11:58 PM
By Rockstarrchevy81 in forum Audio & Video ClassifiedsReplies: 4Last: 10-17-2011, 02:05 PM
By cwaters425 in forum General ClassifiedsReplies: 1Last: 04-06-2010, 08:00 AM
By cwaters425 in forum General ClassifiedsReplies: 4Last: 02-23-2010, 08:00 PM
Tags for this Thread