Results 1 to 2 of 2
05-19-2013, 09:26 PM #1
- Join Date
- May 2013
Can't make any Adjustments on my trailer brakes
I have a 99 gmc sierra, new style, and recently replaced the 6-pin trailer connector to the 7-blade connector, my mechanic hooked this all up and now i dont have any adjustment for the brakes, the brakes are just on full power, they lock up, when the brakes are applied and will not turn down the adjustment to lessen the tension on the brakes, we hooked up another controller and the same thing happened, i hooked my camper up to another truck and the brakes on the camper work fine, so it must be something in the wiring or fuse.....any thoughts? thanks all!!
05-20-2013, 11:45 AM #2
He's may have crossed the "brake lights" for the brake actuator? In other words, he hooked up the brake lights to the brake actuator and vice-versa.
On Edit: I must have been half asleep. What I meant was at the connector, the brake light circuit is directly triggering the brakes on the trailer (the reason they go full on when you step on the brake pedal). I'll bet the wiring in the connector has been flipped (brake lights with brake controller and brake controller with brake lights).
Last edited by steved; 05-20-2013 at 07:24 PM.
By Barnettamb in forum Chevy Silverado Forum (GMC Sierra)Replies: 6Last Post: 01-01-2013, 01:02 PM
By nmtrout in forum Lifted & Offroad SuspensionReplies: 9Last Post: 06-23-2012, 07:13 PM
By taterburban in forum Lifted & Offroad SuspensionReplies: 2Last Post: 05-28-2010, 06:36 AM
By oletrkguy in forum Lifted & Offroad SuspensionReplies: 5Last Post: 04-24-2010, 02:14 PM
By mkruluts in forum Lifted & Offroad SuspensionReplies: 3Last Post: 07-07-2009, 12:31 PM
Tags for this Thread