Results 1 to 2 of 2
05-22-2013, 08:14 PM #1
- Join Date
- May 2013
Exhaust system upgrade for a 76 GMC K25 - Need Help Pls...
I own a 76 GMC K25 350 4WD. I'm looking to replace the exhaust system from the manifold back. Ease of installation & durability are preferred. I hope to stay with the stock manifolds & have 2 2.5" flow master mufflers on hand. I have narrowed my choices to Pypes SGT80 & Hooker Headers 16922HKR systems. Any thoughts? Or others that I should look into? Hoping for a do-it-yourself installation.
Sorry if this topic has been beaten to death, but I was not successful in finding solutions on the web.
Thnaks in advance,
05-28-2013, 01:44 PM #2
absolutly get the headers.
on my chevelle smallblock i have the high flow headers, H pipe, and thrush mufflers. but i have it step down from 3" to 2.5" by the time it ends, because its such a high flow system for a little 307. you need some back pressure.
on my truck, im doing the shorty headers, to the Y pipe, to a 3" catt. then running 3" all the way to the back.
I have looked for a bolt on Y-pipe for the headers... i cannot find one... so unless i do, a shop will need to finish this.Gas was $1.83 when Obama took office.....
By ChevyFan in forum Announcements & FeedbackReplies: 21Last: 09-10-2012, 11:37 PM
By parts bot in forum Chevy Parts eBayReplies: 0Last: 09-05-2012, 07:10 AM
By parts bot in forum Chevy Parts eBayReplies: 0Last: 08-27-2012, 06:50 PM
By parts bot in forum Chevy Parts eBayReplies: 0Last: 08-09-2012, 01:40 AM
By 2091B22 in forum GM Diesel & DuraMaxReplies: 9Last: 02-23-2012, 12:55 PM
Tags for this Thread