Results 1 to 5 of 5
Thread: H1 morimoto retrofit
05-26-2013, 01:29 PM #1
H1 morimoto retrofit
ive been distracted from this project as of lately...
but i just resumed working on it and discovered the biggest upset of all...
1999-2002 silverado headlights are different sizes on driver/passenger side....
the driver side headlight reflector bowl for high and low beams is noticeably deeper than the passenger side.... the morimoto projector fits perfectly with some extra space in the driver side, but with it in place on the passenger side, the lens will not go onto the headlight because the projector sticks out too far...
this does not seem like a problem i can remedy..... looks like I am screwed for now...2000 Chevrolet Silverado
4.3L V6, 4L60E, 2WD, Single Cab
Poweraid TB Spacer
Flowmaster 10-series exhaust (dumped)
Edge CS insight monitor
LS-1 Dual Electric fans
Corvette tranny servo swap
Head Unit: Alpine
Speakers: 6.5" Boston Component set, 4X6 Infinity Kappas
Subs: 2-12" Kicker CVT's
Amps: Alpine-M1000 (subs), Alpine MRX-F65 (Speakers)
305/70R16 NITTO Terra Grapplers
16" PROCOMP 7089's
2" leveling kit
3" Fabtech Spindle Lift Kit
Front/Rear-Bilstein 5100 shocks
35W HID Low Beams
RECON LED smoked roof cab lights
HELLA LED taillights and 3rd brakelight
HELLA FF-75 Aux. Reverse Lamps
RIGID dually D2, flush mount, wide beam
Hawk HPS Brake pads
Russell braided steel brake lines
Powerstop-red powdercoated brake calipers
Powerslot Cryo brake rotors
EGR in-channel window visors
05-26-2013, 05:33 PM #2
- Join Date
- Mar 2007
- Grand Prairie, Texas
- Blog Entries
Are all 2000 Chevy truck headlight assemblys the same? Is there maybe another model that has a deeper reflector bowl on the right hand side? Or can a left hand side assembly possibly be modified to fit the right side?
Maybe theres an aftermarket model thats deeper.
05-26-2013, 09:02 PM #3
not too sure, i checked my oem headlights currently on my truck and they are the same dish depths as these depo ones....
05-26-2013, 09:36 PM #4
I wonder if aftermarket OEM-style assemblies by Certifit will also have the disparity in dish depths from driver to passenger side. It might be worth a call to your local Certifit to find out; they'll usually open the package and measure things for you if you ask them to do so -- at least the one that was local to me would.
05-26-2013, 10:27 PM #5
- Join Date
- Feb 2010
- Lucedale, MS
- Blog Entries
My TYCs I have in mine are about 1/2" different but they both are pretty deep. Cool project though, keep us posted on your project.
By blaze1608 in forum Chevy Silverado Forum (GMC Sierra)Replies: 4Last Post: 02-24-2013, 02:03 PM
By waltv in forum GM PowertrainReplies: 2Last Post: 04-10-2011, 09:18 PM
By mary in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 0Last Post: 04-05-2010, 12:25 PM
By gofish in forum General Chevy & GM Tech QuestionsReplies: 0Last Post: 11-26-2009, 07:10 PM
By User Name in forum General Chevy & GM Tech QuestionsReplies: 2Last Post: 04-21-2009, 11:04 AM