GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 5 of 5
  1. #1

    Default DIY headlight turn signal system,

    some of you have seen my "blue" headlights, well there not totally blue, there also not just my headlights. there my turn signals as well. if you would like to learn how to do this just ask.




    headlights on



    4 - 6.5 inch Phoenix Gold component system
    2 - 5.5 inch Phoenix Gold inch component systems
    2 Phoenix Gold ZPA 0.5 amps
    1 Phoenix Gold tantrum 1200.1
    1 Phoenix Gold ZXti475
    alpine deck
    alpine cd changer
    5 optima yellow tops
    12 - 10 inch MA Audio MA100XE subs
    Phoenix Gold TBA1 line driver and EQ



  2. #2
    Sr. Engineer zach45's Avatar
    Join Date
    Apr 2008
    Location
    staten island new york
    Posts
    481

    Default

    that looks really good man...

    good job

  3. #3

    Default

    if your wondering how to do it i can tell you, its really easy and cheap for a one off look.
    4 - 6.5 inch Phoenix Gold component system
    2 - 5.5 inch Phoenix Gold inch component systems
    2 Phoenix Gold ZPA 0.5 amps
    1 Phoenix Gold tantrum 1200.1
    1 Phoenix Gold ZXti475
    alpine deck
    alpine cd changer
    5 optima yellow tops
    12 - 10 inch MA Audio MA100XE subs
    Phoenix Gold TBA1 line driver and EQ



  4. #4

    Default

    I for 1 would like to know, looks great!
    Chris S. The GoFastPadre I like to drive fast and I've got the speeding tickets to prove it. 00 Sierra Z71 ECSB K&N CAI Pacesetter Shorties (soon to be replaced with LT's) Magnaflow HFC's Flowmasters with True Duals and H-Pipe more mods to come

  5. #5

    Default

    needed stuff
    - 4 5mm LED's ( http://www.oznium.com/led )
    - 3 or 4 feet of wire
    - electric drill and bits
    and epoxy or silicone rubber



    1. remove your grille. and locate turn signal wires

    2. take the drill and appropriate size bit. and put one hole in each headlight chamber (4 holes in total)

    3. insert one led in each hole and glue in using the silicone rubber or epoxy

    4. run the positive and negative the the right wires, you might have to play around with the combination to get the effect that you want. but the black will be the negative

    5. splice then together (led wires and turn signals)

    6 and then put your grille back on and step back at your new glow.
    4 - 6.5 inch Phoenix Gold component system
    2 - 5.5 inch Phoenix Gold inch component systems
    2 Phoenix Gold ZPA 0.5 amps
    1 Phoenix Gold tantrum 1200.1
    1 Phoenix Gold ZXti475
    alpine deck
    alpine cd changer
    5 optima yellow tops
    12 - 10 inch MA Audio MA100XE subs
    Phoenix Gold TBA1 line driver and EQ



Similar Threads

  1. 5 AMP Turn signal draw
    By willardearl76 in forum General Chevy & GM Tech Questions
    Replies: 3
    Last Post: 05-04-2010, 08:11 AM
  2. turn signal fuse
    By blazerguy in forum General Chevy & GM Tech Questions
    Replies: 2
    Last Post: 11-08-2009, 09:09 PM
  3. Turn Signal Wiring
    By RCHCOOP4 in forum Audio, Video & Gadget Tech
    Replies: 1
    Last Post: 01-31-2008, 10:45 AM
  4. F/S 67-74 turn signal switch
    By DaryleC in forum General Classifieds
    Replies: 0
    Last Post: 01-28-2008, 11:22 AM
  5. Turn signal switch on an 82.
    By CoryRJanssen in forum Chevy Suburban Forum (GMC Yukon XL)
    Replies: 0
    Last Post: 06-09-2007, 11:15 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •