Results 1 to 8 of 8
06-04-2013, 05:29 PM #1
Has anyone taken apart a NNBS headlight??
Im thinking of buying a set of NNBS headlights to take apart and modify. Im looking at removing the amber lense and painting some parts black and possibly putting in some red halo rings. I have heard of some putting them in the oven for 15 minutes at a certain temp to allow the glue to become flexible enough to seperate them but also have heard that does not work. I seen a video on youtube of someone cutting into the lights and re-assembling with black rtv silicone but not sure I want to take that route. Any ideas guys on ripping into the lights. I think I can get a set that someone replaced with projectors for around a $100 so its worth it to me to buy them instead of experimenting on my originals.
- - - Updated - - -
Anybody?? Bueller? Bueller?
2011 Silverado CrewCab 5.3L*Ram Air Look Cowl Induction Reflexxion Hood*6" Pro Comp Lift*Flowmaster Dual exhaust*Perfect Launch Rear Diff. Cover*Led Smoke Taillights*L.E.D.Smoke 3rd Brakelight*60" L.E.D. Tailgate Bar*Rearview Mirror Reverse Camera and Sensors*Smoke Headlight Covers*Front Bumper Grill Insert*Deezee Black Alum. Diamond Rail covers*20" Ultra Motorsports Rims wrapped with 35.5"B.F. Goodrich Tires*Inchannel Raingaurds*CAI*Bullydog GT Tuner*Alpine Amp*Boss 6x9's*Boston Acoustic Subs*Terrantula Tweeters*Custom Sub box*Red Led Interior Accents*5% Ultimacool duo tint rear window and doors, 20% front doors*Custom Vinyl Graphics*Demolded*Debadged*Painted drums and calipers*
Future Mods Include: Custom Interior Hydrographics, Electronic Rollup Toneau Cover, 4.56 Gears, Painted rear bumper
06-11-2013, 06:54 PM #2
06-12-2013, 10:36 AM #3
i too have seen people putting their headlights in the oven to remove them from their shells, this does make me a bit apprehensive (with good concern, i doubt your misses wants auto parts in a piece of cookery)
You might try a heat gun or a blow dryer if you dont have an actual heat gun although you may need a specific temperature of heat that only a heat gun can provide. This is the route i'd take.
Also most of the mods i've seen involving the oven are for motorcycle retrofits (IE: Taking parts off a bmw car and adapting them to a bike) so they were less than concerned when the shell didnt need to be adhered back together. If you do go this route im not sure that simply putting everything back together and applying the heat gun to try to re-adhere the light assembly together would even work.
06-12-2013, 05:39 PM #4
2013 Silverado LTZ White Diamond Crew Cab
Advent OGM1 Navigation
Husky Liners GearBox Underseat Storage
EGR Rail Caps
K&N Air Filter
Flowsound 40 Muffler
Hypertech Max Energy Tune (only top end limiter removed and AFM disabled)
Chrome Tailgate Handle Cover
TonnoPro HF-155 Tonneau Cover
WeatherTech Front and Rear Splash Guards
Husky Liners X-Act Contour Floor Liners
WeatherTech Side Window Deflectors
06-29-2013, 09:21 AM #5
06-29-2013, 05:55 PM #6
Be weary of Oracle lights, I've heard they are flimsy lights and the come apart months after purchase, and something about a no-return policy.
06-30-2013, 01:14 AM #7
- Join Date
- Sep 2009
- Northern GA
- Blog Entries
Check out oracle lighting for halos. DO NOT put the nnbs headlights in the oven the will melt. Use a hot knife or a dremel2009 chevy 1500 z71 4x4
2.5 ccm level,2.5 inch rear blocks 305/60/18 coopers stt,Debadged,10 series flow w/dual exit in front or right rear tire, KN CAI, diablo InTune, 18% tint all the way around ,spec-d euro headlights with black housings,winjet smoke LED tail lights,putco LED third brake light smoked, fab fours front bumper with 10k warn winch, RK sports ram air hood
1965 c10 swb, zz4 350 with the hot cam and fast burn heads and a 780 Holley on top, richmond super street 5 speed,restorod
01-10-2014, 10:09 PM #8
By 2k8z71 in forum Photo & Video GalleryReplies: 4Last: 02-06-2013, 04:26 AM
By Holty in forum GM Vehicle ClassifiedsReplies: 0Last: 01-31-2013, 01:21 PM
By ahmitchell1 in forum Performance & FuelReplies: 0Last: 03-21-2012, 09:08 AM
By bronx boy in forum The Coffee Shop ~ Chit ChatReplies: 9Last: 04-13-2011, 05:34 AM
By plowxman in forum Chevy Silverado Forum (GMC Sierra)Replies: 20Last: 01-01-2009, 05:37 PM
Tags for this Thread