GM Truck Club
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Page 21 of 42 FirstFirst ... 11192021222331 ... Last Post byLast Post by
Results 201 to 210 of 411
  1. #201


    replaced my pcv valve, and cleaned my egr valve as best i could
    2000 Chevrolet Silverado

    4.3L V6, 4L60E, 2WD, Single Cab
    Airaid CAI
    Poweraid TB Spacer
    Flowmaster 10-series exhaust (dumped)
    Edge CS insight monitor
    4.10 gears
    Limited-slip differential
    LS-1 Dual Electric fans
    Corvette tranny servo swap

    Head Unit: Alpine
    Speakers: Alpine SPR-60C 6.5" component set, 4X6 Infinity Kappas
    Subs: 2-12" Kicker CVT's
    Amps: Alpine-M1000 (subs), Alpine MRX-F65 (Speakers)

    305/70R16 NITTO Terra Grapplers
    16" PROCOMP 7089's
    2" leveling kit
    3" Fabtech Spindle Lift Kit
    Front/Rear-Bilstein 5100 shocks

    35W HID Low Beams
    RECON LED smoked roof cab lights
    HELLA LED taillights and 3rd brakelight
    HELLA FF-75 Aux. Reverse Lamps
    RIGID dually D2, flush mount, wide beam
    Hawk HPS Brake pads
    Russell braided steel brake lines
    Powerstop-red powdercoated brake calipers
    Powerslot Cryo brake rotors
    EGR in-channel window visors

  2. #202


    Got backed into in a parking lot. I backed up and a lady backed her bonneville into my rear quarter panel behind the back bumper. The dent was huge. As I walked closer to look at it it popped out!! There are a few small creases left, but I guess I can deal with that. Could have been worse. The funniest part was that the women told me that I backed into her and that she honked to let me know she was coming. Hmmm! If I backed into you why is your REAR tail light broken and my SIDE panel dented?

    1995 Silverado 4x4
    6" BDS Suspension Lift-3" Body Lift-Add A Leaf in rear -Trailmaster SSV Shocks-Duel Steering Stabilizer Kit -AirAid Cold air intake-
    4.56 Gears with Detroit Auburn Locker-Pro-Comp Traction Bars with duel shocks-Aluminum Skid Plate Kit-38.5" x 16.5" Mickey Thompson Baja Claws-Constant Dropping fuel gauge

    2005 Yukon XL Jet Power Programmer, Bilstein Shocks, Bilstein rear springs, Helwig Anti-sway bars, EGR Window Visors, EGR Hood Shield, Denali Headlights, Headlight harness upgrade, GE NightHawk Bulbs, White Night Rear lighting system, Russell Braided SS brake lines, PowerStop Brake pads, PowerStop cross drilled and Slotted Rotors,
    2002 Silverado ext cab 2wd (Sold)
    2003 Yukon XL (Totaled)

  3. #203


    Alternator started to fail today... bearings squealing and now not charging properly. Ordered myself a new high output one from mean & green.
    2009 Chevy Silverado 2500HDLT 6.0L w/ Towing Package, Dick Cepek GM8 Rims, Dick Cepek FC II 33X11.50R17,RKSport Ram-Air Hood(Functional), Lazer Lite Aluminum Tonneau Cover, Road Armor Stealth Bumper, PIAA Lighting, Diablo Trinity Tuner, Diablew Custom Tune, BullyDog Cold Air Intake, American Racing Headers w/highflow cats, Corsa Performance Sport Exhaust, Custom Striping, Black Bowties front and rear, Fuel Grille Inserts, Recon Headlights, Readylift Shocks, Readylift Upper Contol Arms, 2" Blocks in the Rear..

    Future Plans: HD Tie Rods, Under hood upgrades, Crower Camshaft and possibly electric fans.

  4. #204


    Changed my oil yesterday. I was about a month late. Keep in mind, I still use conventional oil and change it every 3,000 miles.

    - - - Updated - - -

    Just ordered all new headlight housings and a billet grille for my truck. If everything gets here in time, I'll have a nice little project for next weekend. Before and after pics will follow.
    Clint (TX) 2001 Silverado LS 4.8L auto 2wd ECSB [GARAGE]
    Gasoline or gunpowder: If you ain't burning one, you ain't having fun!
    NRA Endowment Member 5 24 48 88 - Hendrick Motorsports FTW!

  5. #205


    Washed and detailed my truck, since the forcast calls for 70 deg weather all week.
    Then installed new billet grills in the bumper and lower front valence to match the main grill.
    Had to spend a little time manufacturing a new lower license plate bracket since the new valence grill deletes it and Texas requires one.

  6. #206


    Saturday in the flurries we got it was perfect snow for doughnuts. Had fun in both the high school and an elementary school parking lot. Also did the coolest drift across the parking lot it was amazing wish I had taken video.

    1996 Chevy Tahoe LT 5.7L V8 4X4 205,000+ miles. Built proudly at Janesville Assembly in Janesville, Wisconsin
    Basic mods: Lights all over, bunch of electrical work, and a couple cooling mods.

    Check out my other mods in My Garage:

  7. #207


    Ordered my new rear diff cover and a Fel-pro gasket for the diff. Its a chrome cover and has a drain plug which will make my life easier. Wish I could afford a nice supported and finned one like summit sells but I don't have the cash for it right now. I'll be replacing the fluid and cover in 2 weeks when I have spring break.

  8. #208


    I just can't seem to win with this truck. Last week I replaced the slip yoke for the front driveshaft because of play in the t-case. Today I ordered a new moog front wheel hub for the driver side. It has been whining for the past 6 months. But, I could only hear it on a very smooth new section of road. Last night the whine turned into a hum. I removed the wheel and front brakes and confirmed that it is the hub. So to date, since I have owned it over the last 2 years I have changed: Steering gear box, brake hydro booster, front diff, t-case, slip yoke, front passenger side hub, passenger side cv shaft, power steering pump, alternator, idler pully, tensioner and pulley (twice), front impact sensor, SIR coil. That does not include what I consider maintenance items that I have changed. Front and rear shocks, rear springs, u-joints, idler arm and bracket, inner and outer tie rod ends, plugs, diff fluids, tires. My 2003 that I owned had more miles on it and half of these issues. But, I guess I can't complain that much it does have 160,000 miles on it. At this rate it will be all mechanically new in 3 more years.

  9. #209


    I purchased a set of 16" steel rallies for my 90 suburban. Now I just have to find the correct tool to enlarge the center hub hole diameter to 3 5/8" lol

  10. #210


    The cover and gasket came in today. The cover looks great and seems well made.
    Click image for larger version. 

Name:	IMG_20140226_164239_068.jpg 
Views:	30 
Size:	48.5 KB 
ID:	58009Click image for larger version. 

Name:	IMG_20140226_164259_473.jpg 
Views:	30 
Size:	47.5 KB 
ID:	58010

Similar Threads

  1. What Has Your Truck Done for You Today?
    By jake's silverado in forum Chevy Truck Talk & GM News
    Replies: 26
    Last: 05-18-2014, 07:27 PM
  2. What have u done to ur GM truck today?
    By devilsalmostfree in forum Chevy Truck Talk & GM News
    Replies: 2389
    Last: 06-07-2013, 05:01 PM
  3. Truck died twice today...
    By texas99lb in forum Chevy Silverado Forum (GMC Sierra)
    Replies: 10
    Last: 01-06-2010, 01:13 AM
  4. Replies: 0
    Last: 12-29-2009, 08:00 AM
  5. My Private Part Died Today
    By Cableguy in forum Photo & Video Gallery
    Replies: 5
    Last: 07-23-2007, 01:06 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts