Results 1 to 8 of 8
Thread: Brake Light Sensor Wires ID
06-08-2013, 01:21 PM #1
Brake Light Sensor Wires ID2010 Chevy Silverado Z71 LTZ 4x4
Sun Roof, Navigation, Rhino Bed, Rhino Under, PlastiDip Rear Bumper, PlastiDip Bow Ties, PlastiDip Running Boards, LED Taillights, LED Parking Lamps, LED Interior Dome, LED Turn Arrows, Back-up Camera, Tri-Fold Tonneau, HID 5000K Fogs, Lows
06-08-2013, 07:43 PM #2
I had to look it up. I assume, the 3 wires provide 12v on one and the other two connect the device in series with the light(s).
What's the plan, to just use the center brake light?Ray
'09 Avalanche LTZ - Black
'05 Envoy XL (sold)
06-10-2013, 11:56 AM #3
The plan was to hook the attention moduel in series with the wires going to the brake lights so when I touch the brake, the is a quick pulse then steady burn.
Here's a video...
06-11-2013, 12:46 PM #4
BTW, your assumption that one wire goes to the right side and one goes to the left side may not be correct. one wire is usually to tell the cruse control the brake has been applied.
06-11-2013, 12:49 PM #5
06-11-2013, 12:53 PM #6
Try a search for 2010 GM wiring. I found a complete set of drawings one time I was looking. The wiring colours should be there.
06-11-2013, 12:55 PM #7
06-11-2013, 01:00 PM #8
By Hillbilly Gem in forum Chevy Silverado Forum (GMC Sierra)Replies: 5Last Post: 03-03-2013, 03:39 PM
By Harahan Mike in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 3Last Post: 12-03-2011, 10:38 PM
By beckya99 in forum Chevy Tahoe Forum (GMC Yukon, Cadillac Escalade)Replies: 0Last Post: 07-11-2011, 11:46 AM
By 98ls10 in forum General Chevy & GM Tech QuestionsReplies: 1Last Post: 11-08-2010, 01:44 PM
By chevy00 in forum Chevy Silverado Forum (GMC Sierra)Replies: 3Last Post: 10-19-2005, 11:17 PM