GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 2 of 2

Hybrid View

  1. #1
    Jr. Engineer Cowpie's Avatar
    Join Date
    Jun 2013
    Location
    Central Iowa
    Posts
    216

    Default Silicon In Used OIl Samples

    Occasionally, those of us that do regular used oil sampling on stuff we run, have come across a spike in silicon in the sample. Usually associated with dirt contamination. I got this newsletter from my oil lab recently regarding this. This has some good information if anyone cares to take a read.

    http://us2.campaign-archive1.com/?u=...4&e=9b020d8365
    Hey there, VA, what do ya' say? How many vets did you kill today?

  2. #2
    Sr. Apprentice
    Join Date
    Jun 2013
    Location
    1391 N Jefferson St., Anaheim CA 92807
    Posts
    65

    Default

    i hope views of this thread give u useful knowledge.With the use of oil analysis dust entry in engine. as soon as a dust entry problem occurs there is an increase in the silicon level of the oil and an acceleration of the wear pattern. As long as the oil samples are being taken at regular intervals in the correct manner, the dust entry will be detected at a very early stage. If effective corrective action is taken, the life of the component will be significantly increased, reducing maintenance costs.

Similar Threads

  1. Looking for hi temp silicon Vacuum lines
    By gadwhite in forum Chevy Truck Accessories
    Replies: 0
    Last: 02-28-2011, 06:00 PM
  2. Replies: 0
    Last: 01-10-2010, 10:20 AM
  3. Replies: 0
    Last: 01-09-2010, 10:10 PM
  4. Replies: 0
    Last: 12-22-2007, 10:29 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •