Results 1 to 1 of 1
06-26-2013, 03:42 PM #1
- Join Date
- Jun 2013
NP 246 Transfer case rebuild..Special tools needed?
Hi folks! I'm replacing the worn out trans in my 2001 Suburban 1500 LT and I figured while I have the transfer case out a rebuild would be in order. The [COLOR=blue !important][COLOR=blue !important]truck[/COLOR][/COLOR] has 160K on it so I imagine a few parts maybe worn. I also want to check to see if the pump upgrade was done to it as I am the 3rd owner. My question is are there any special tools needed for the rebuilding process? I know I need snap ring pliers to seperate the case but are there any seals that can only be installed with a special seal [COLOR=blue !important][COLOR=blue !important]installer[/COLOR][/COLOR] specific to this unit( Like the ones required for he 4L60E trans)? Thanks in advance