Results 1 to 5 of 5
07-15-2013, 06:07 AM #1
lack of power and temp running a little high
Alright I'll start out with the specs of my truck it's a 05 Silverado 5.3 4x4, I was driving around the woods Saturday and the dirt road I was on started to get muddy nothing bad but enough to put a strain on the engine. Well the engine acted as if it had no power and the temp immediately started to rise up to 220-230°F. Never had this happen before and honestly don't have a clue where to start. I appreciate any input into the matter . Oh and if it makes any difference I just hit 101,000 miles.
07-15-2013, 07:29 AM #2
- Join Date
- Jun 2013
First off, check coolant level and make sure radiator isn't caked with mud
07-15-2013, 09:41 AM #3
1995 Silverado 4x4
6" BDS Suspension Lift-3" Body Lift-Add A Leaf in rear -Trailmaster SSV Shocks-Duel Steering Stabilizer Kit -AirAid Cold air intake-
4.56 Gears with Detroit Auburn Locker-Pro-Comp Traction Bars with duel shocks-Aluminum Skid Plate Kit-38.5" x 16.5" Mickey Thompson Baja Claws-Constant Dropping fuel gauge
2005 Yukon XL Jet Power Programmer, Bilstein Shocks, Bilstein rear springs, Helwig Anti-sway bars, EGR Window Visors, EGR Hood Shield, Denali Headlights, Headlight harness upgrade, GE NightHawk Bulbs, White Night Rear lighting system, Russell Braided SS brake lines, PowerStop Brake pads, PowerStop cross drilled and Slotted Rotors, http://www.gmtruckclub.com/forum/sho...5-GMC-Yukon-XL
2002 Silverado ext cab 2wd (Sold)
2003 Yukon XL (Totaled)
07-15-2013, 09:47 AM #4
with no check engine lights make sure your coolant is correct and the radiator is clean. now if the coolant level was low you should have a light on with that .
off roading in a condition causing high load in a high gear will create high temps in the tranny. check this fluid for damage and bubbles.
lack of power with no check engine lights also check the fuel pressure with a pressure gauge for the correct PSI.
if the exhaust some how got plugged up by the mud or damaged that could also be the cause.
07-15-2013, 04:48 PM #5
I appreciate it fellas I'm gonna try what yall said and see if any may be the issue I'll get back with yall with what I find
Tags for this Thread