Results 1 to 5 of 5
07-13-2013, 06:41 PM #1
Front shock premature failure- what could cause this?
Just got back from a 1600+ mile road trip with the 99 Suburban and she did great (for the most part). However, on the way back there was a lot of rattling noise coming from the front of the car which progressively got worse. The noise sounded like a bad shock, and sure enough the front left shock had oil all over it. It is a Monroe Reflex monotube that I installed in February. What would cause this to go bad? I read on Monroe's web site that a missing suspension stop could be the issue, but that's not the case on mine (though I'll double check).
This is the second set of Reflex shocks I've put on the front (the first ones lasted about 15 months). The reviews I've read is that they are good shocks, but I don't want to have to replace them again. Any ideas?
Also, suggestions on what I should switch to? I'm thinking Bilsteins.Current Rides: |99 Chevy Suburban- the family truckster |93 Lincoln Town Car- 250K miles & still churning -now a fan of the Panther platform
Former GM cars: |78 Suburban 454 |71 Buick Electra 225 (deuce & a quarter) |75 Monte Carlo- 400SB- heaviest doors GM every made |70 Impala coupe- my 1st car
07-13-2013, 07:21 PM #2
- Join Date
- Apr 2010
- Piermont,NY, back in Northern NJ now, But may be in IL soon....
As said many times.. Bilsteins!!! The only way to go Is there any lift on this truck?08 Z71 Avalanche Mods to date: K&N CAI,Hellwig Swaybars and End Links, Corsa Sport Exhaust, Superchips Programer,IPCW LOF & 3rd brake light and tails, AMI Gas door,Show Hooks and Door locks, Enkei Wheels, with Pirelli tires, StreetScene Bowties, Grant Steering wheel,Muth signal mirrors,SSBC Big Brake kit,Huskyliner Mug gards,Floor mats and Hood shield, McGard Lug nuts and locks, Bedrug, Cervini's Ram Air hood,35watt HID Fog lights, Sylvania bulbs all around ZXE's Highs and Lows, WhiteNight Back up lights,Sirius and HD Radio, SnugTop sitting on deck now Got a Softopper on now,Tempress Boat Hatches.... New Bilstein shocks are on... New Mods coming soon..... X
07-14-2013, 12:26 AM #3
- Join Date
- Mar 2007
- Grand Prairie, Texas
- Blog Entries
Yea normally lift or lowering will cause early failure of the shocks.
How worn is your front suspension? Could the front end be sagging and placing to much force/weight on the shocks?
07-14-2013, 08:28 AM #4
- Join Date
- Jan 2012
- New York
- Blog Entries
Bilstein and fox are both great shocks. I just put a set of ReadyLIFT shocks on my truck... so far I am liking them. My main decision with going with ReadyLIFT was that they are rebuildable and their product warranty. The only downside is they are a little pricey.2009 Chevy Silverado 2500HDLT 6.0L w/ Towing Package, Dick Cepek GM8 Rims, Dick Cepek FC II 33X11.50R17,RKSport Ram-Air Hood(Functional), Lazer Lite Aluminum Tonneau Cover, Road Armor Stealth Bumper, PIAA Lighting, Diablo Trinity Tuner, Diablew Custom Tune, BullyDog Cold Air Intake, American Racing Headers w/highflow cats, Corsa Performance Sport Exhaust, Custom Striping, Black Bowties front and rear, Fuel Grille Inserts, Recon Headlights, Readylift Shocks, Readylift Upper Contol Arms, 2" Blocks in the Rear..
Future Plans: HD Tie Rods, Under hood upgrades, Crower Camshaft and possibly electric fans.
07-14-2013, 08:35 PM #5
No lift- just stock.
I just replaced the bad shock (under warranty) and noticed that I had to lift the control arm to get the shock to line up (fully extended). I then realized that this is the second time that the shock on the same side went bad. I'm thinking the torsion bar needs to be adjusted to give it a little more lift and that it is sagging too much, overextending the shock, especially when I have the front end lifted. Does that sound right?
Starting my search for measuring and adjusting torsion bars.