View Poll Results: White or Chrome
- 2. You may not vote on this poll
Results 1 to 7 of 7
07-14-2013, 08:47 PM #1
Painting inside of tail light fixture
I'm considering painting the inside of the reflectors of the taillights on the 'burb, but I'm not sure whether to paint them chrome or white. The goal is to make them brighter by reflecting more light out. White theoretically reflects more light, but I'm not sure if it'll look right behind the red lense. Chrome may look more right, but I'm not one to go chrome-crazy.
So, white or chrome paint? This is what the reflector looks like:
1991 Chevy Suburban 1/2 ton 2WD w/ chevy SBC 350-3/4 ton drivetrain upgrade w/4.10 gears 200K miles
2005 Saturn ION-2 Stock 277K miles
1982 Bronco, 1993 Bronco (sold), 1971 M35A2 Deuce and a Half
There are 10 kinds of people, those who understand binary, and those who dont...
Remember kids, the only difference between screwing around and science is writing it down- Adam Savage
07-18-2013, 07:50 AM #2
I was really hoping to at least try this out this weekend. I may pick up a can of both to compare the results.
07-18-2013, 09:12 AM #3
- Join Date
- Feb 2010
- Lucedale, MS
- Blog Entries
Of all colors white does reflect light the best but nothing will reflect light better than chrome. As far as I know they don't make chrome in a can, are you talking about that paint that they call chrome? I don't think anything will reflect better than what they are now. Good luck on this project.
07-18-2013, 10:32 AM #4
07-18-2013, 01:20 PM #5
As for why I'm painting them, I've read some guides in the past that to brighten up the old 80s bodystyle instrument clusters, people take them apart, paint the inside of the plastic back case white, and that makes a world of a difference. So, I was going to apply the same theory to the taillight buckets. As they sit, they're a fading, crusty, greyish-yellow from years of sun. So, I was planning on painting them to get the light reflectivity back up to as much as it can be without moving to the brighter LEDs.
08-30-2013, 07:53 AM #6
have you thought of use silver tape like is used on A/C ducts ? just a thought.02 Z71 stock (for now) 5.3 l
08-30-2013, 08:18 AM #7
- Join Date
- Mar 2007
- Grand Prairie, Texas
- Blog Entries
Christofer is that reflector the aluminium version or painted plastic?
If its the aluminium version you could polish it, aluminium when polished is highly reflective, its also very easy to polish with good results.
Polish with a mild compound then use a clear coat or something like Zoops.
Tags for this Thread