Results 1 to 10 of 10
Thread: Center Console swap
07-15-2013, 11:23 AM #1
Center Console swap
What's up everyone. I have a question about doing a center console swap on my 99 Sierra. I found a center console from a '04 Yukon with the Bose subwoofer and the rear radio controls. I was wondering if I can somehow get that to bolt right on to my truck. I like the look of the newer consoles better and the more available room on them.
Anyone know if its a direct swap or do I have to mod it some to get it to fit?
If at first you don't succeed, chances are, you are using too small of a cheater bar
1999 GMC Sierra SLT Z71 | 5.3 Vortec | Spectre Cold Air Intake | TransDapt TBS | Hypertech 30005 Tune | 2005 Chevy Tails | Denali headlights | AWS Bug Shield | 265/75/16 Mastercraft Courser A/T | "Ghetto" painted tailgate | Boss HD Speakers | 2005 Overhead Console | Dual Thrush Turbo Mufflers
Bigger Amp Alternator | Electric Fans | Oil/Trans Fluid cooler | Re-done exhaust | Paint | Interior Restoration/upgrade with newer model stuff | Window Visors (In channel) | Tint | Low-Profile Tool Box | LEDs throughout stock cab locations | And whatever is spurr of the moment
US Navy Sailor :sign0011:
07-15-2013, 02:52 PM #2
Im pretty sure pre 2003 silverado's you would have to mod it to get it to workObjects in mirror are losing
2003 Chevy Silverado Z71, 5.3L, K&N 57 series, 2.5'' Flowmaster Super 10 series dual exhaust , Corvette Servo, McNew Automotive Dyno tune, SS gauge cluster, Extang Trifecta Tonneau, Pacesetter shorty headers, Goodmark cowl hood, Sony Xplod speakers, Kenwood DDX-470 exhaust tips, 16" Ultra Badlands polished wheels, Pirelli Scorpion ATR .
07-15-2013, 03:33 PM #3
2013 Silverado LTZ White Diamond Crew Cab
Advent OGM1 Navigation
Husky Liners GearBox Underseat Storage
EGR Rail Caps
K&N Air Filter
Flowsound 40 Muffler
Hypertech Max Energy Tune (only top end limiter removed and AFM disabled)
Chrome Tailgate Handle Cover
TonnoPro HF-155 Tonneau Cover
WeatherTech Front and Rear Splash Guards
Husky Liners X-Act Contour Floor Liners
WeatherTech Side Window Deflectors
07-15-2013, 08:35 PM #4
console should work, dont think anything else will tho.
when you making it up this way?
2011 GMC Sierra SLE 5.3 Z71 4X4 Stealth Gray Metallic
Tow mirrors - Diablew Tuned - Flowmaster Regular 40 - Ready Lift 2.5' lift - BFG LT A/T K/Os - Carr Light Wing - TruckLite LED lights - Optima Red Top - 50% Front Window Tint - Line-X bedliner - Aidaid MIT - Tekonsha P2 - ARS Billet Grill
07-16-2013, 09:52 AM #5
07-16-2013, 02:09 PM #6
From where did you obtain the console and how much did u pay if u dont mind me asking, i have a "work bench" up front with no console, but the hardware appears to be there for a direct bolt on center console that goes from the back of the front seats all thew way up to the bottom of the dash, as well as some units which end shortly after the cup holders
07-16-2013, 05:40 PM #7
07-20-2013, 12:58 PM #8
You will need to take the seats out and get the base plate as well. That is what the console bolts to. At least I had to when i did my swap. But i did have the middle seat as well. Im glad I did the swap on my truck.02GMC2500 4X4 extcab.Kenda Mud tires.3"Magnaflow true dual Exhaust.throttle body spacer with K&N air filter.Hypertech programmer.White LED dash lights.LED back up lights and marker lights.LED cab lights.LED interior lights.6000k HID conversion lows, with high/low conversion.Installed Center Console
07-20-2013, 01:15 PM #9
I have the stock center center console already. Is it the same base plate or will I have to swap them out as well?
07-20-2013, 01:23 PM #10