GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 4 of 4

Hybrid View

  1. #1

    Default clutch to electric fan

    I have an 01 Silverado 1500 with a 5.3L and would like to switch to an electric one for a number of reasons. Im wondering if anyone else has attempted this and how I should go about doing this swap? Details would be greatly appreciated. Thanks in advance!

  2. #2

    Default

    With that bodystyle of truck, it should be pretty easy to put an electric fan in it. From what I recall, there's already provisions in the computer and wiring harness to output a fan turn-on signal. The computer may need a flash to turn on the function, but it should be there. From there, install a heavy relay to power the fan, and voila, a computer-controlled e-fan.
    Christopher

    1991 Chevy Suburban 1/2 ton 2WD w/ chevy SBC 350-3/4 ton drivetrain upgrade w/4.10 gears 200K miles
    2005 Saturn ION-2 Stock 277K miles
    1982 Bronco, 1993 Bronco (sold), 1971 M35A2 Deuce and a Half



    There are 10 kinds of people, those who understand binary, and those who dont...

    Remember kids, the only difference between screwing around and science is writing it down- Adam Savage

  3. #3

    Default

    i did some research and heard there were bolt on kits for the fans on your original radiator but i cant find anything like that. i was thinking of going to my local junk yard and get myself two fans and make myself some brackets. the only issue im facing is the computer aspect of it. looking at the big jumble of wires and deciphering them isnt really my strong suit. any suggestions?

  4. #4
    Sr. Apprentice
    Join Date
    Jun 2013
    Location
    1391 N Jefferson St., Anaheim CA 92807
    Posts
    65

    Default

    hi newcheylover
    you have need practical knowledge about this,for avoiding more problem.Electric fan has high efficiency because the electric fan motor is directly mounted to the same frame which mounts the shroud,smaller the clearance between tip of the fan blade & the shroud,more efficiently fan will move air.it may create other problem if improperly installed.if you want to install an electric fan,you must have a knowledge about generic process.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •