GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 3 of 3
  1. #1

    Default 94 suburban rear barn door window removal

    I tried doing some searches around on the internet to find some info on removing the left barn door window. It appears to just be glued in unless im missing something do I just take a good razor blade and cut the adhesive away from the door and hope my wife can catch the window before it hits the ground? If this is the case since ive never attempted to get a window like this out how do I "glue" it back to the door I would imagine there is a proper compound that does this. Also im trying to save the window im just removing it so I can do some body work on that door.

  2. #2

    Default

    I have never done one. Hopefully someone comes along that can help. If not I would stop by a local body shop or junk yard. Maybe they can give you some info

    1995 Silverado 4x4
    6" BDS Suspension Lift-3" Body Lift-Add A Leaf in rear -Trailmaster SSV Shocks-Duel Steering Stabilizer Kit -AirAid Cold air intake-
    4.56 Gears with Detroit Auburn Locker-Pro-Comp Traction Bars with duel shocks-Aluminum Skid Plate Kit-38.5" x 16.5" Mickey Thompson Baja Claws-Constant Dropping fuel gauge

    2005 Yukon XL Jet Power Programmer, Bilstein Shocks, Bilstein rear springs, Helwig Anti-sway bars, EGR Window Visors, EGR Hood Shield, Denali Headlights, Headlight harness upgrade, GE NightHawk Bulbs, White Night Rear lighting system, Russell Braided SS brake lines, PowerStop Brake pads, PowerStop cross drilled and Slotted Rotors, http://www.gmtruckclub.com/forum/sho...5-GMC-Yukon-XL
    2002 Silverado ext cab 2wd (Sold)
    2003 Yukon XL (Totaled)

  3. #3

    Default

    I watched a glass installer remove a rear Suburban barn door window a few weeks back.
    He used a vibrating knife to sepparate the glass from the door. While he didnt end up breaking the glass he wasnt worried about breaking it either since he was prepared to replace it. He did say it was much easier to get out as a solid piece vice cleaning out all the broken glass.
    He also said if you reuse the glass it has to be cleaned real well and prepped with a special primer.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •