GM Truck Club
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 5 of 5

Thread: crank pulley

  1. #1

    Default crank pulley

    i have a 94 suburban k1500. im looking for a stock sized crank pulley. i would prefer aluminum but i will settle for steel so long as its chevy's stock sized pulley.

    condition: no nicks, gouges or heavy rust/oxidation.
    94 sub 6inch lift 34inch bfg mt. massive rework project soon. the audio system hit 150.3db so now its time to rebuild and try for 155db. mudpuppy is also getting a new engine, rebuilt ifs, dual 500amp 15.1vdc alts, 5 5,000amp batts, ant the combined wattage with the new system should be close to 15,000watts. this is going to be a wild ride boy and girls.

  2. #2


    Found stock ACDelco one for good price.

    - - - Updated - - -

    Also found some additional options:

    1996 Chevy Tahoe LT 5.7L V8 4X4 205,000+ miles. Built proudly at Janesville Assembly in Janesville, Wisconsin
    Basic mods: Lights all over, bunch of electrical work, and a couple cooling mods.

    Check out my other mods in My Garage:

  3. Likes Pikey liked this post
  4. #3


    Just to make sure. Do you need the pulley itself or the balancer?

  5. #4


    Quote Originally Posted by BurbanMan View Post
    Just to make sure. Do you need the pulley itself or the balancer?
    just the pulley. im open to combo sets though if they look nice enough

  6. #5


    Well crap. All I have is the balancer lol I'll check around in my neck of the woods though. What price range are you looking for

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts