Results 11 to 18 of 18
10-16-2013, 02:11 PM #11
I just looked at the diagram for the back of your truck. Then I "borrowed" some pictures from another forum, It looks like you can adjust the latch. If you look at the third pic. the bolt hole is slotted. It might be as simple as loosening the bolt and sliding it closer to the rear of the truck. Wow, the truck in the pic is dirty.
1995 Silverado 4x4
6" BDS Suspension Lift-3" Body Lift-Add A Leaf in rear -Trailmaster SSV Shocks-Duel Steering Stabilizer Kit -AirAid Cold air intake-
4.56 Gears with Detroit Auburn Locker-Pro-Comp Traction Bars with duel shocks-Aluminum Skid Plate Kit-38.5" x 16.5" Mickey Thompson Baja Claws-Constant Dropping fuel gauge
2005 Yukon XL Jet Power Programmer, Bilstein Shocks, Bilstein rear springs, Helwig Anti-sway bars, EGR Window Visors, EGR Hood Shield, Denali Headlights, Headlight harness upgrade, GE NightHawk Bulbs, White Night Rear lighting system, Russell Braided SS brake lines, PowerStop Brake pads, PowerStop cross drilled and Slotted Rotors, http://www.gmtruckclub.com/forum/sho...5-GMC-Yukon-XL
2002 Silverado ext cab 2wd (Sold)
2003 Yukon XL (Totaled)
Conlan Rose thanked for this post10-16-2013, 02:28 PM #12
- Join Date
- Dec 2004
- Arlington, Texas, United States
- Blog Entries
10 Chevy Traverse LT AWD
02 Chevy Trailblazer LS (110K+ miles - loaded except for 4WD - WRECKED!)
99 Chevy Cavalier LS (105K+ miles - commuter car)
78 Chevy Suburban Silverado (454, 3/4 ton)
62 GMC 3/4 ton Pickup (350 police interceptor)
Remember: Search Before Posting | Fill out Your Profile & Signature
* I've been saying for years that I was going to change my username, and I finally did.
10-16-2013, 02:54 PM #13
I think that might fix the problem. I will have to call my dad and tell him I think I found a fix. Looks simple enough anyone could do it. Wish I had the truck with me to try it right now.
1996 Chevy Tahoe LT 5.7L V8 4X4 205,000+ miles. Built proudly at Janesville Assembly in Janesville, Wisconsin
Basic mods: Lights all over, bunch of electrical work, and a couple cooling mods.
Check out my other mods in My Garage: http://www.gmtruckclub.com/forum/sho...t-Tahoe-4-Door
10-16-2013, 02:58 PM #14
you may have to pull the interior panel to get to that bolt and nut
10-16-2013, 03:07 PM #15
10-16-2013, 03:13 PM #16
I wonder if your latch got bumped hard while loading something in the back
10-16-2013, 03:21 PM #17
It is highly possible. Its also possible people opening the rear wrong has messed it up. No one seems to understand that you open the glass THEN the tailgate they always go tailgate first and wonder why it wont open.
11-28-2013, 08:44 PM #18
Ok, so today I opened up the rear door and tried to fix the locking issue, but learned its not the latch that's not adjusted right it is the part on the window glass that latches in. Because the tailgate has sagged the latch is lower than it used to be so the glass clip needs to be adjusted down. It is easy to fix but I forgot my deep sockets in CT and I'm currently in VT so I will need to buy some deep ones up here to use and finish the fix.
I still keep finding glass every where and have removed trim panels and found shards behind them.
Tags for this Thread