Results 1 to 3 of 3
10-28-2013, 10:53 PM #1
- Join Date
- Oct 2013
Will a 2002 seat fit in an 1986 truck?
Can any of you guys tell me if a seat out of a 2002 chevrolet 1500 will fit a 86 1500? And what years will crossover. Thanks 2butterbeans
10-28-2013, 10:56 PM #2
I doubt that the holes would even come close to lining up for the mounts. Would like to see this done though. Don't think it would look to bad. If they don't, ya could probably fab your own mounts or drill and tap a hole or two.
If at first you don't succeed, chances are, you are using too small of a cheater bar
1999 GMC Sierra SLT Z71 | 5.3 Vortec | Spectre Cold Air Intake | TransDapt TBS | Hypertech 30005 Tune | 2005 Chevy Tails | Denali headlights | AWS Bug Shield | 265/75/16 Mastercraft Courser A/T | "Ghetto" painted tailgate | Boss HD Speakers | 2005 Overhead Console | Dual Thrush Turbo Mufflers
Bigger Amp Alternator | Electric Fans | Oil/Trans Fluid cooler | Re-done exhaust | Paint | Interior Restoration/upgrade with newer model stuff | Window Visors (In channel) | Tint | Low-Profile Tool Box | LEDs throughout stock cab locations | And whatever is spurr of the moment
US Navy Sailor :sign0011:
10-28-2013, 11:49 PM #3
Moved to General GM tech sub forum and changed title for more responses.
I highly doubt it! You can probably make it work with some decent fabrication skills. If it will be safe is another question. I would probably get the measurements for both seats. Then make an adapter out of 1/4-1/2" steel. I would countersink the holes and use some grade 8 counter sunk cap screws and nuts to go into the bottom of the frame of your new seat. That way you basically have a flat surface to sit on your floorboard. Then just drill the holes to fit your existing bolt pattern.
1995 Silverado 4x4
6" BDS Suspension Lift-3" Body Lift-Add A Leaf in rear -Trailmaster SSV Shocks-Duel Steering Stabilizer Kit -AirAid Cold air intake-
4.56 Gears with Detroit Auburn Locker-Pro-Comp Traction Bars with duel shocks-Aluminum Skid Plate Kit-38.5" x 16.5" Mickey Thompson Baja Claws-Constant Dropping fuel gauge
2005 Yukon XL Jet Power Programmer, Bilstein Shocks, Bilstein rear springs, Helwig Anti-sway bars, EGR Window Visors, EGR Hood Shield, Denali Headlights, Headlight harness upgrade, GE NightHawk Bulbs, White Night Rear lighting system, Russell Braided SS brake lines, PowerStop Brake pads, PowerStop cross drilled and Slotted Rotors, http://www.gmtruckclub.com/forum/sho...5-GMC-Yukon-XL
2002 Silverado ext cab 2wd (Sold)
2003 Yukon XL (Totaled)
Tags for this Thread