GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 4 of 4

Thread: Front bumper

  1. #1

    Default Front bumper

    I was wondering if a ford f250 iron cross front bumper will fit on my 2009 silverado 1500. My buddy blew up his motor and I told him that the bumper he has on his truck is the one I want for mine. He told me he would sell it cheap and it already has the fog lights and wench mounted. I don't know the year of the ford but I think it is around 2005. I didn't want to buy it and then it doesn't fit and then have the bumper just hanging out I. The bed of my truck. Thank y'all who post back.

  2. #2

    Default

    I doubt it. I checked the iron cross website and they are different part numbers between GM trucks and ford. There is no point that the ford and GM us the same part number. You might be able to get it to work with some fabricating skills. It may also look funny as it is not contoured to the specific model of your truck.

    1995 Silverado 4x4
    6" BDS Suspension Lift-3" Body Lift-Add A Leaf in rear -Trailmaster SSV Shocks-Duel Steering Stabilizer Kit -AirAid Cold air intake-
    4.56 Gears with Detroit Auburn Locker-Pro-Comp Traction Bars with duel shocks-Aluminum Skid Plate Kit-38.5" x 16.5" Mickey Thompson Baja Claws-Constant Dropping fuel gauge

    2005 Yukon XL Jet Power Programmer, Bilstein Shocks, Bilstein rear springs, Helwig Anti-sway bars, EGR Window Visors, EGR Hood Shield, Denali Headlights, Headlight harness upgrade, GE NightHawk Bulbs, White Night Rear lighting system, Russell Braided SS brake lines, PowerStop Brake pads, PowerStop cross drilled and Slotted Rotors, http://www.gmtruckclub.com/forum/sho...5-GMC-Yukon-XL
    2002 Silverado ext cab 2wd (Sold)
    2003 Yukon XL (Totaled)

  3. #3

    Default

    With great fabrication skills anything can be made to work, the question is will it look right?
    Definately isnt gonna be a bolt on affair.
    Is a good deal still a good deal if you spend a fourtune in time or money making it work?
    Will your friend let you do any mock-up before commiting? If not I probably wouldnt do it as youll most likely be buying a large piece of scrap metal.

  4. #4

    Default

    Hey, anything can work....
    right before august when I was visiting family in colorado I helped my uncle fab a Jeep rear bumper onto my cousins 1990 something toyota pickup, cut the mounting brackets and welded some new 1/4 plate brackets on and drillled the mounting holes... it looked pretty smooth i must say, oh and all this in one day too... but realistically all trucks rear ends are the same, its all straight with whatever curvature you add to it, front ends are a different story since each manufacture has different angles and slopes and aerodynamic designs, so i agree with previous posts YES it will work with proper fabbing, BUT its up to you if it looks right
    2000 Chevrolet Silverado

    Powertrain:
    4.3L V6, 4L60E, 2WD, Single Cab
    Performance:
    Airaid CAI
    Poweraid TB Spacer
    Flowmaster 10-series exhaust (dumped)
    BLACKBEAR TUNED!!!
    Edge CS insight monitor
    4.10 gears
    Limited-slip differential
    LS-1 Dual Electric fans
    Corvette tranny servo swap

    Audio:
    Head Unit: Alpine
    Speakers: Alpine SPR-60C 6.5" component set, 4X6 Infinity Kappas
    Subs: 2-12" Kicker CVT's
    Amps: Alpine-M1000 (subs), Alpine MRX-F65 (Speakers)


    Tires/Wheels:
    305/70R16 NITTO Terra Grapplers
    16" PROCOMP 7089's
    Suspension:
    2" leveling kit
    3" Fabtech Spindle Lift Kit
    Front/Rear-Bilstein 5100 shocks

    Lighting:
    FRONT
    35W HID Low Beams
    RECON LED smoked roof cab lights
    REAR
    HELLA LED taillights and 3rd brakelight
    HELLA FF-75 Aux. Reverse Lamps
    RIGID dually D2, flush mount, wide beam
    Accessories:
    Hawk HPS Brake pads
    Russell braided steel brake lines
    Powerstop-red powdercoated brake calipers
    Powerslot Cryo brake rotors
    EGR in-channel window visors

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •