GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 6 of 6
  1. #1

    Default rear end in my truck is not right

    I was backing out of mydrive way and I put it in first and when I went to take off my back tires locked up and wouldent move forward so I put it in reverse and was gonna see if it would move at all and after I did that it was fine it freed up and would move any ideas on what is wrong with it
    94 chevy 1500 350 5 speed 4x4 97 gmc 1500 350 vortec 2wd auto 89 s10 89 Yamaha blaster ported wiseco crank 60 over wiseco piston dg exaust and lots more

  2. #2
    Jr. Mechanic
    Join Date
    Apr 2013
    Location
    East Central Iowa
    Posts
    88

    Default

    Maybe ya had a brake lock up temporarily. Just a thought.

  3. #3

    Default

    if zipps is right, you should definitely grease your brake caliper guide pins
    2000 Chevrolet Silverado

    Powertrain:
    4.3L V6, 4L60E, 2WD, Single Cab
    Performance:
    Airaid CAI
    Poweraid TB Spacer
    Flowmaster 10-series exhaust (dumped)
    BLACKBEAR TUNED!!!
    Edge CS insight monitor
    4.10 gears
    Limited-slip differential
    LS-1 Dual Electric fans
    Corvette tranny servo swap

    Audio:
    Head Unit: Alpine
    Speakers: Alpine SPR-60C 6.5" component set, 4X6 Infinity Kappas
    Subs: 2-12" Kicker CVT's
    Amps: Alpine-M1000 (subs), Alpine MRX-F65 (Speakers)


    Tires/Wheels:
    305/70R16 NITTO Terra Grapplers
    16" PROCOMP 7089's
    Suspension:
    2" leveling kit
    3" Fabtech Spindle Lift Kit
    Front/Rear-Bilstein 5100 shocks

    Lighting:
    FRONT
    35W HID Low Beams
    RECON LED smoked roof cab lights
    REAR
    HELLA LED taillights and 3rd brakelight
    HELLA FF-75 Aux. Reverse Lamps
    RIGID dually D2, flush mount, wide beam
    Accessories:
    Hawk HPS Brake pads
    Russell braided steel brake lines
    Powerstop-red powdercoated brake calipers
    Powerslot Cryo brake rotors
    EGR in-channel window visors

  4. #4
    Sr. Engineer Dana W's Avatar
    Join Date
    Dec 2011
    Location
    Chuluota, Florida
    Posts
    361

    Default

    Quote Originally Posted by mud runner View Post
    I was backing out of mydrive way and I put it in first and when I went to take off my back tires locked up and wouldent move forward so I put it in reverse and was gonna see if it would move at all and after I did that it was fine it freed up and would move any ideas on what is wrong with it
    I'm thinkin' you had an e-brake actuator lever freeze up. Rear drums in one of those old trucks right?

  5. #5

    Default

    iI figured out what was wrong with it my parking break dident comwe back up all of the way and was still engagued

  6. #6

    Default

    Quote Originally Posted by mud runner View Post
    iI figured out what was wrong with it my parking break dident comwe back up all of the way and was still engagued
    oops! Hate when I do that
    Chuckie!!!


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •