GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 8 of 8
  1. #1

    Default 99-06 silverado door check replacement

    replaced mine after the driver side bushing went out and kept "popping" when i open or closed the door...
    only 3 bolts hold it all together, but you have to remove the door panel to get the old one out and the new one in. one bolt (visible), the other two bolts, underneath the rubber grommet in the picture, very easy job!
    before
    Click image for larger version. 

Name:	IMG_4147 (480x640).jpg 
Views:	29 
Size:	29.1 KB 
ID:	56624

    after
    Click image for larger version. 

Name:	IMG_4169 (480x640).jpg 
Views:	29 
Size:	29.3 KB 
ID:	56629

    before
    Click image for larger version. 

Name:	IMG_4149 (480x640).jpg 
Views:	29 
Size:	32.9 KB 
ID:	56625

    after
    Click image for larger version. 

Name:	IMG_4168 (640x480).jpg 
Views:	29 
Size:	30.0 KB 
ID:	56628

    new(left) old(right)
    Click image for larger version. 

Name:	IMG_4165 (640x480).jpg 
Views:	29 
Size:	32.7 KB 
ID:	56626

    the p.o.s. bushing that was dead
    Click image for larger version. 

Name:	IMG_4167 (640x480).jpg 
Views:	29 
Size:	39.0 KB 
ID:	56627


    only thing is.... the new ones are already creaking!!!
    2000 Chevrolet Silverado

    Powertrain:
    4.3L V6, 4L60E, 2WD, Single Cab
    Performance:
    Airaid CAI
    Poweraid TB Spacer
    Flowmaster 10-series exhaust (dumped)
    BLACKBEAR TUNED!!!
    Edge CS insight monitor
    4.10 gears
    Limited-slip differential
    LS-1 Dual Electric fans
    Corvette tranny servo swap

    Audio:
    Head Unit: Alpine
    Speakers: Alpine SPR-60C 6.5" component set, 4X6 Infinity Kappas
    Subs: 2-12" Kicker CVT's
    Amps: Alpine-M1000 (subs), Alpine MRX-F65 (Speakers)


    Tires/Wheels:
    305/70R16 NITTO Terra Grapplers
    16" PROCOMP 7089's
    Suspension:
    2" leveling kit
    3" Fabtech Spindle Lift Kit
    Front/Rear-Bilstein 5100 shocks

    Lighting:
    FRONT
    35W HID Low Beams
    RECON LED smoked roof cab lights
    REAR
    HELLA LED taillights and 3rd brakelight
    HELLA FF-75 Aux. Reverse Lamps
    RIGID dually D2, flush mount, wide beam
    Accessories:
    Hawk HPS Brake pads
    Russell braided steel brake lines
    Powerstop-red powdercoated brake calipers
    Powerslot Cryo brake rotors
    EGR in-channel window visors

  2. #2
    Legend
    TRPLXL2's Avatar
    Join Date
    Jan 2009
    Location
    Norwalk, Ohio
    Posts
    3,359
    Blog Entries
    8

    Default

    White lithium grease will lubricate the new hinge, and stop the creaking. Good job on the repair, I know you saved yourself some money in labor.
    2004 Chevy Colorado
    LS1 5.7 swap/TBSS rear axle swap

  3. #3
    Jr. Engineer BRB46's Avatar
    Join Date
    Apr 2011
    Location
    Western Mass
    Posts
    207

    Default

    Nice write up. Is the replacement one OEM or an aftermarket one as the design is different.
    2006 Silverado 1500 5.3L ecsb Z71,afe pro s dry air filter, color matched tailgate handle and bezel,color matched front bow tie, led interior illumination, 5000K HID lows, Black powder coated wheels, Blacked out body side moldings, Rough Country 2.5" level/lift kit, Magnaflow muffler

  4. #4

    Default

    Quote Originally Posted by BRB46 View Post
    Nice write up. Is the replacement one OEM or an aftermarket one as the design is different.
    it is an oem replacement, ive been looking at trucks door checks when i was pulling in cars at discount tire, and it seems all trucks after 02, came with this new "updated" design
    2000 Chevrolet Silverado

    Powertrain:
    4.3L V6, 4L60E, 2WD, Single Cab
    Performance:
    Airaid CAI
    Poweraid TB Spacer
    Flowmaster 10-series exhaust (dumped)
    BLACKBEAR TUNED!!!
    Edge CS insight monitor
    4.10 gears
    Limited-slip differential
    LS-1 Dual Electric fans
    Corvette tranny servo swap

    Audio:
    Head Unit: Alpine
    Speakers: Alpine SPR-60C 6.5" component set, 4X6 Infinity Kappas
    Subs: 2-12" Kicker CVT's
    Amps: Alpine-M1000 (subs), Alpine MRX-F65 (Speakers)


    Tires/Wheels:
    305/70R16 NITTO Terra Grapplers
    16" PROCOMP 7089's
    Suspension:
    2" leveling kit
    3" Fabtech Spindle Lift Kit
    Front/Rear-Bilstein 5100 shocks

    Lighting:
    FRONT
    35W HID Low Beams
    RECON LED smoked roof cab lights
    REAR
    HELLA LED taillights and 3rd brakelight
    HELLA FF-75 Aux. Reverse Lamps
    RIGID dually D2, flush mount, wide beam
    Accessories:
    Hawk HPS Brake pads
    Russell braided steel brake lines
    Powerstop-red powdercoated brake calipers
    Powerslot Cryo brake rotors
    EGR in-channel window visors

  5. #5

    Default

    $71 bucks from the dealership... I did my driver door yesterday

  6. #6

    Default

    quick update on this, my hinges have yet to stop creaking.... they never creaked with the old ones, just popped as the bushing was dead, but i have yet to see the day these hinges become quiet, very annoying...
    2000 Chevrolet Silverado

    Powertrain:
    4.3L V6, 4L60E, 2WD, Single Cab
    Performance:
    Airaid CAI
    Poweraid TB Spacer
    Flowmaster 10-series exhaust (dumped)
    BLACKBEAR TUNED!!!
    Edge CS insight monitor
    4.10 gears
    Limited-slip differential
    LS-1 Dual Electric fans
    Corvette tranny servo swap

    Audio:
    Head Unit: Alpine
    Speakers: Alpine SPR-60C 6.5" component set, 4X6 Infinity Kappas
    Subs: 2-12" Kicker CVT's
    Amps: Alpine-M1000 (subs), Alpine MRX-F65 (Speakers)


    Tires/Wheels:
    305/70R16 NITTO Terra Grapplers
    16" PROCOMP 7089's
    Suspension:
    2" leveling kit
    3" Fabtech Spindle Lift Kit
    Front/Rear-Bilstein 5100 shocks

    Lighting:
    FRONT
    35W HID Low Beams
    RECON LED smoked roof cab lights
    REAR
    HELLA LED taillights and 3rd brakelight
    HELLA FF-75 Aux. Reverse Lamps
    RIGID dually D2, flush mount, wide beam
    Accessories:
    Hawk HPS Brake pads
    Russell braided steel brake lines
    Powerstop-red powdercoated brake calipers
    Powerslot Cryo brake rotors
    EGR in-channel window visors

  7. #7

    Default

    Mine don't creak, 250k, try some silicone spray or graphite spray...., WD40 will rinse off in the rain

  8. #8

    Default

    already used some white lithium grease, but it doesnt get into the bushing eye because it is so tight...
    2000 Chevrolet Silverado

    Powertrain:
    4.3L V6, 4L60E, 2WD, Single Cab
    Performance:
    Airaid CAI
    Poweraid TB Spacer
    Flowmaster 10-series exhaust (dumped)
    BLACKBEAR TUNED!!!
    Edge CS insight monitor
    4.10 gears
    Limited-slip differential
    LS-1 Dual Electric fans
    Corvette tranny servo swap

    Audio:
    Head Unit: Alpine
    Speakers: Alpine SPR-60C 6.5" component set, 4X6 Infinity Kappas
    Subs: 2-12" Kicker CVT's
    Amps: Alpine-M1000 (subs), Alpine MRX-F65 (Speakers)


    Tires/Wheels:
    305/70R16 NITTO Terra Grapplers
    16" PROCOMP 7089's
    Suspension:
    2" leveling kit
    3" Fabtech Spindle Lift Kit
    Front/Rear-Bilstein 5100 shocks

    Lighting:
    FRONT
    35W HID Low Beams
    RECON LED smoked roof cab lights
    REAR
    HELLA LED taillights and 3rd brakelight
    HELLA FF-75 Aux. Reverse Lamps
    RIGID dually D2, flush mount, wide beam
    Accessories:
    Hawk HPS Brake pads
    Russell braided steel brake lines
    Powerstop-red powdercoated brake calipers
    Powerslot Cryo brake rotors
    EGR in-channel window visors

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •