GM Truck Club
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 2 of 2

Hybrid View

  1. #1

    Default Clearance Lights not working

    I have a 97 K2500. The clearance lights have no power going to them. I have a Haynes manual and it says the wires come from a convenience center. Does anyone know where it is located and what it looks like.

  2. #2



    The diagram I am looking at shows the black wire from the lights goes to a ground behind the left side of the dash. The white wire from the lights connects to a brown wire at a dash harness that is 12 cm from the steering column breakout (not sure exactly what they mean there). That brown wire goes to the headlamp switch.

    Here's a picture of the schematic I am looking at:


    99 K 1500 Suburban
    78 Silverado Big 10 w/factory 454
    00 S-10 Blazer
    1976 Trans Am
    1980 Honda CB900 Custom

Similar Threads

  1. Courtesy lights not working
    By RONNYB in forum General Chevy & GM Tech Questions
    Replies: 3
    Last: 03-02-2010, 02:23 PM
  2. '97 dash lights not working
    By safetyfast in forum Chevy C/K Truck Forum
    Replies: 7
    Last: 09-12-2009, 08:22 PM
  3. break lights not working
    By jimjim1234 in forum General Chevy & GM Tech Questions
    Replies: 5
    Last: 06-15-2009, 09:01 AM
  4. single LED clearance lights
    By kawasaki_kid in forum Audio, Video & Gadget Tech
    Replies: 1
    Last: 04-13-2009, 11:47 AM
  5. dash lights not working
    By mxkjk2 in forum Audio, Video & Gadget Tech
    Replies: 2
    Last: 01-19-2009, 09:27 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts