GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 2 of 2
  1. #1

    Default Looking for Descent Quality Headlight Assembly 2000 GMC Jimmy

    I just received a TYC brand replacement headlight assembly from Advance Auto and could not get the rubber seal to tuck in behind the body of the truck and therefore could not get the clips in place. Tomorrow I am going to adjust the torx screw to see if I can get a better fit.

    But, in the meantime I am exploring other brands of aftermarket headlight assemblies. Has anyone had good experiece with any particular brand of headlight assembly? Mine have the fog lights.

  2. #2

    Default

    So I just changed my 2000 Impala assembly and noticed that the rubber seal is a bit wider than the ones on the car (original ones). Now I was able to trim mine and I presume that the aftermarket ones are bit wider because if they are being replaced as a result of collision and quarter panels are not in the perfect place the gasket will take a bit of the gap. Just my thoughts...
    I like the new clear lenses...
    Pat
    Finally a signature and Avatar! I also posted some pics in the Gallery.
    2011 2500HD Crew Cab 4X4 Z71 6Liter.
    2011 Outback Travel Trailer 260FL
    So Happy to not be on the edge of GVWR Over Load!!

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •