GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 2 of 2

Thread: Safety lighting

Hybrid View

  1. #1
    Jr. Apprentice RescueRon's Avatar
    Join Date
    Aug 2008
    Location
    Lewisville, Tx
    Posts
    12

    Default Safety lighting

    i have a 08 colorado and installing a switch box in the cab for the safety lights. need to know best way to run the power line from the battery to the inside of the truck

  2. #2

    Default

    Why do you want to run a power line into the cab?
    The switching system should be set-up with underhood relays, all power should go to the relay then to the light. The only wires from the cab should be a signal wire from the switch to the relay.
    Light switches arent normally rated to take a lot of amps, if properly run through a relay they only see a minimal amount of amperage.
    And as an added benefit the relays are normally closer to the power source and the end user, this in turn reduces line drop and helps the lights to burn brighter.

Similar Threads

  1. Hid/led lighting
    By BMP0014 in forum Chevy Truck Accessories
    Replies: 0
    Last Post: 05-29-2010, 01:21 PM
  2. Under vehicle lighting
    By jdickerson83 in forum Chevy Silverado Forum (GMC Sierra)
    Replies: 3
    Last Post: 08-09-2009, 10:26 AM
  3. Exterior lighting
    By drumrob in forum Chevy Truck Accessories
    Replies: 17
    Last Post: 03-16-2009, 05:58 PM
  4. Lighting issue
    By nsdread07 in forum General Chevy & GM Tech Questions
    Replies: 1
    Last Post: 03-10-2009, 11:17 AM
  5. new lighting? yes or no?
    By cascott325 in forum Chevy Truck Accessories
    Replies: 12
    Last Post: 09-16-2008, 10:54 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •