GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 2 of 2

Thread: CV joints

  1. #1

    Default CV joints

    I have a 2002 Silverado 2500HD 4 WD, 8.1 engine with 90kK miles. Rrecently I have heard little clicking sounds coming from front wheels in a sharp turn. I'm wondering if it's my CV joints? If so has anyone ever tried to lub them. I have not tried removing the rubber boots covering the CV joints, but it looks like that would be a good place to start. Has anyone had any experience with this issue? Thanks
    melat71
    Last edited by melat71; 08-26-2008 at 09:16 AM.

  2. #2

    Default

    if the boots are in good shapethen they should be fine. look at the boots and look or tears or holes if any time new CVs. you should see some grease mess if the boot is torn as well.....mike
    Michael Collins
    1993 4X4 Suburban
    many other toys as well

Similar Threads

  1. Ball Joints
    By Eaglefixer in forum Lifted & Offroad Suspension
    Replies: 4
    Last: 03-15-2010, 10:32 AM
  2. Driveshaft...........U-Joints?
    By TRPLXL2 in forum Chevy S10 Forum (GMC Sonoma)
    Replies: 2
    Last: 02-21-2010, 06:51 PM
  3. U joints??
    By TJbear in forum Chevy Silverado Forum (GMC Sierra)
    Replies: 1
    Last: 10-27-2009, 01:13 AM
  4. u joints
    By andrew bookout in forum Chevy C/K Truck Forum
    Replies: 4
    Last: 03-18-2009, 07:35 PM
  5. ball joints [Expired Topic]
    By MrShorty in forum Chevy Suburban Forum (GMC Yukon XL)
    Replies: 1
    Last: 01-21-2006, 04:46 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •